How to use set method of config Package

Best Gauge code snippet using config.set

config.go

Source:config.go

...42	Timeout int64  `yaml:"timeout"`43}44// PortsConfig is a mapping of port "name" to a PortConfig.45type PortsConfig map[string]PortConfig46// PortGroupConfig describes a set of identical Ports in a PortGroup.47type PortGroupConfig struct {48	Port  string `yaml:"port"` // Should correspond with a PortsConfig key49	Count int64  `yaml:"count"`50}51// PortGroupsConfig is a mapping of port group "name" to PortGroupConfigs.52type PortGroupsConfig map[string][]PortGroupConfig53// RateLimitConfig describes the configuration for a rate limiter.54type RateLimitConfig struct {55	CPS float64 `yaml:"cps"` // Cycles per second56}57// RateLimitsConfig is a mapping of "name" to RateLimitConfig.58type RateLimitsConfig map[string]RateLimitConfig59// TestConfig describes the elements of a test, for use by TestRunner, which60// correspond to their respective named elements in the config.61//62// Ex. A `targets` value of "default" in the config would correspond to a63// TargetsConfig key of "default" which contains the definitions of targets.64type TestConfig struct {65	Targets   string `yaml:"targets"`    // Should correspond with a TargetsConfig key66	PortGroup string `yaml:"port_group"` // Should correspond with a PortGroupsConfig key67	RateLimit string `yaml:"rate_limit"` // Should correspond with a RateLimitsConfig key68}69// TestsConfig is a slice of TestConfig structs.70type TestsConfig []TestConfig71// TargetConfig describes a single target for testing, including tags that72// are applied to the resulting summaries.73//74// TODO(dmar): Restructure this to be more Dropbox specific, and reduce the75//      data being included in this config. Most of this can come from a base,76//      and then be populated by MDB queries.77type TargetConfig struct {78	IP   string `yaml:"ip"`79	Port int64  `yaml:"port"`80	Tags Tags   `yaml:"tags"`81}82// AddrString converts the tc into a string formated "IP:port" combo.83func (tc *TargetConfig) AddrString() string {84	str := fmt.Sprintf("%v:%v", tc.IP, tc.Port)85	return str86}87// ResolveUDPAddr converts the tc into a net.UDPAddr pointer.88func (tc *TargetConfig) ResolveUDPAddr() (*net.UDPAddr, error) {89	return net.ResolveUDPAddr("udp", tc.AddrString())90}91// TargetSet is a slice of TargetConfig structs.92type TargetSet []TargetConfig93// TagSet converts the ts into TagSet struct.94func (ts TargetSet) TagSet() TagSet {95	tagset := make(TagSet)96	ts.IntoTagSet(tagset)97	return tagset98}99// IntoTagSet is similar to TagSet but updates the provided tagset instead of100// creating a new one.101func (ts TargetSet) IntoTagSet(tagset TagSet) {102	for _, target := range ts {103		key := target.IP104		// If the IP/key already exists, this will override it105		tagset[key] = target.Tags106	}107}108// ListTargets provides a slice of "IP:port" string representations for all of109// the targets in the ts.110func (ts TargetSet) ListTargets() []string {111	addrs := make([]string, 0)112	for _, target := range ts {113		addrs = append(addrs, target.AddrString())114	}115	return addrs116}117// ListResolvedTargets provides a slice of net.UDPAddr pointers for all of118// the targets in the ts, and will return with an error as soon as one is hit.119func (ts TargetSet) ListResolvedTargets() ([]*net.UDPAddr, error) {120	addrs := make([]*net.UDPAddr, 0)121	for _, target := range ts {122		addr, err := target.ResolveUDPAddr()123		if err != nil {124			return addrs, err125		}126		addrs = append(addrs, addr)127	}128	return addrs, nil129}130// TargetsConfig is a mapping of "name" to TargetSet slice.131type TargetsConfig map[string]TargetSet132// TagSet is a wrapper, and merges the TagSet output for all TargetSet slices133// within the tc.134func (tc TargetsConfig) TagSet() TagSet {135	ts := make(TagSet)136	tc.IntoTagSet(ts)137	return ts138}139// IntoTagSet is a wrapper about the same function for each contained TargetSet140// and merges them into an existing ts.141func (tc TargetsConfig) IntoTagSet(ts TagSet) {142	// TODO(dmar): Right now, this doesn't distinguish by TargetSet, so if a143	//      target appears in multiple places, only the last entry will be144	//      used.145	for _, targetSet := range tc {146		targetSet.IntoTagSet(ts)147	}148}149// SummarizationConfig describes the parameters for setting up a Summarizer150// and related ResultHandlers.151type SummarizationConfig struct {152	Interval int64 `yaml:"interval"`153	Handlers int64 `yaml:"handlers"`154}155// APIConfig describes the parameters for the JSON HTTP API.156type APIConfig struct {157	Bind string `yaml:"bind"`158}159// CollectorConfig wraps all of the above structs/maps/slices and defines the160// overall configuration for a collector.161type CollectorConfig struct {162	Summarization SummarizationConfig `yaml:"summarization"`163	API           APIConfig           `yaml:"api"`...

cloudfront-loggly-uploader.go

Source:cloudfront-loggly-uploader.go

...31var configFile = flag.String("configFile", "/etc/cloudfront-loggly-uploader.conf.yaml", "Config file")32var syslogFlag = flag.Bool("syslog", false, "Log to syslog instead of stdout")33var daemonFlag = flag.Bool("daemon", false, "Run in daemon mode")34var debugFlag = flag.Bool("debug", false, "Enable debug output")35func setupLogging() {36	if *syslogFlag == true {37		logToSyslog()38	} else {39		logToStdout()40	}41}42func logToStdout() {43	log.SetOutput(os.Stdout)44	if *debugFlag == true {45		log.SetFlags(log.Flags() | log.Lshortfile)46		logging.DebugLogger.SetFlags(log.Lshortfile)47		logging.DebugLogger.SetOutput(os.Stdout)48	}49}50func logToSyslog() {51	syslogWriter, err := syslog.New(syslog.LOG_NOTICE, os.Args[0])52	if err != nil {53		log.Fatalf("Unable to create syslog writer: %s\n", err)54	}55	log.SetFlags(0)56	log.SetOutput(syslogWriter)57	if *debugFlag == true {58		logging.DebugLogger.SetFlags(log.Lshortfile)59		logging.DebugLogger.SetOutput(syslogWriter)60	}61}62// Main function63func main() {64	flag.Parse()65	setupLogging()66	appConfig := &Config{}67	configFileData, err := ioutil.ReadFile(*configFile)68	if err != nil {69		log.Printf("Unable to open config file: %s\n", *configFile)70		os.Exit(1)71	}72	err = yaml.Unmarshal(configFileData, &appConfig)73	if err != nil {74		log.Printf("Unable to unmarshal Yaml config file: %s\n", *configFile)75		os.Exit(1)76	}77	awsCreds := credentials.NewStaticCredentials(appConfig.S3AWSAccessKeyID,78		appConfig.S3AWSSecretAccessKey,79		"")...

set

Using AI Code Generation

1import "config"2func main() {3    config.Set("name", "value")4}5import "config"6func main() {7    config.Get("name")8}9import "config"10func main() {11    config.Set("name", "value")12}13import "config"14func main() {15    config.Get("name")16}17import "config"18func main() {19    config.Set("name", "value")20}21import "config"22func main() {23    config.Get("name")24}25import "config"26func main() {27    config.Set("name", "value")28}29import "config"30func main() {31    config.Get("name")32}33import "config"34func main() {35    config.Set("name", "value")36}37import "config"38func main() {39    config.Get("name")40}41import "config"42func main() {43    config.Set("name", "value")44}45import "config"46func main() {47    config.Get("name")48}49import "config"50func main() {51    config.Set("name", "value")52}53import "config"54func main() {55    config.Get("name")56}57import "config"58func main() {59    config.Set("name", "value")60}

set

Using AI Code Generation

1import (2func main() {3	viper.Set("name", "Siddharth")4	viper.Set("age", 25)5	viper.Set("address.city", "Noida")6	viper.Set("address.country", "India")7	fmt.Println(viper.Get("name"))8	fmt.Println(viper.Get("age"))9	fmt.Println(viper.Get("address.city"))10	fmt.Println(viper.Get("address.country"))11}12import (13func main() {14		panic(fmt.Errorf("Fatal error config file: %s \n", err))15	}16	fmt.Println(viper.Get("name"))17	fmt.Println(viper.Get("age"))18	fmt.Println(viper.Get("address.city"))19	fmt.Println(viper.Get("address.country"))20}21import (22type Config struct {23}24type Address struct {25}26func main() {27		panic(fmt.Errorf("Fatal error config file: %s \n", err))28	}29	err = viper.Unmarshal(&config)30	if err != nil {31		fmt.Printf("unable to decode into struct, %v", err)32	}33	fmt.Println(config

set

Using AI Code Generation

1import "fmt"2import "config"3func main() {4  config.Set("name", "golang")5  fmt.Println(config.Get("name"))6}7import "fmt"8type Config struct {9}10func (c *Config) Set(key, value string) {11}12func (c *Config) Get(key string) string {13}14var config = Config{data: make(map[string]string)}15func Set(key, value string) {16  config.Set(key, value)17}18func Get(key string) string {19  return config.Get(key)20}

set

Using AI Code Generation

1import (2func main() {3 viper.Set("name", "saurabh")4 fmt.Println(viper.Get("name"))5}6SetDefault() method7func (v *Viper) SetDefault(key string, value interface{})8import (9func main() {10 viper.SetDefault("name", "saurabh")11 fmt.Println(viper.Get("name"))12}13IsSet() method14func (v *Viper) IsSet(key string) bool15import (16func main() {17 viper.Set("name", "saurabh")18 fmt.Println(viper.IsSet("name"))19}20AllSettings() method21func (v *Viper) AllSettings() map[string]interface{}22import (23func main() {24 viper.Set("name", "saurabh")25 fmt.Println(viper.AllSettings())26}27InConfig() method28func (v *Viper) In

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.