For AI agents and LLMs: a machine-readable index is available at llms.txt. A plain-Markdown version of any documentation page is available by appending .md to its URL.
Skip to main content

Troubleshoot Agent Assurance

Start with diagnostics:

rook --version
rook doctor
rook auth status

In the TUI, run /doctor. It reports:

  • The active environment
  • The controller
  • The authentication state
  • The project storage directory
  • Registered agents
Rook doctor diagnostics showing local environment and controller reachability

Installation Problems​

rook: command not found​

Open a new terminal after installation and check:

command -v rook
echo "$PATH"

If you installed a tarball manually, link rook-<sha>/bin/rook into a directory already on PATH.

Node.js version error​

Rook requires Node.js 20 or newer:

node --version

Upgrade Node.js and rerun rook --version.

Download resets after the release lookup​

Release assets are served from a different GitHub asset domain. A VPN or corporate proxy can allow the repository request but reset the redirected asset download. Run the installer off VPN, or use:

gh release download --repo LambdaTest/rook --pattern '*.tar.gz'

Authentication and Credits​

Rook says you are signed out​

rook login
rook auth status

If the token was revoked, log in again. Nothing signs in automatically.

Controller is unreachable​

Check rook doctor. A network failure is not evidence that the token is invalid. Before repeating login, verify:

  • VPN
  • DNS
  • Proxy
  • Controller availability

If the controller remains unreachable, confirm the network, VPN, or proxy requirements with your Rook administrator.

Credits or budget are exhausted​

/plan
/budget

Rook enforces these budget thresholds:

  • 70%: Rook warns you.
  • 90%: Rook stops starting new work.
  • 100%: Rook halts.

In-flight work finishes, and completed scenarios remain on disk. Narrow the suite before increasing the budget.

Discovery Problems​

Rook finds no agent​

  • Start from the repository or agent directory rather than a parent folder.
  • Put the PRD, prompts, tool definitions, README, and examples inside the authorized workspace.
  • Run /explore . --force after adding material.
  • If you know the directory is an agent, accept the explicit registration prompt.

A GitHub URL is rejected​

This is expected. Clone the repository and run Rook in the local checkout. Direct URL exploration is not supported.

External exploration says nothing was recorded​

The current release can read an explicitly selected external directory but cannot persist its record. Change into the external checkout and start Rook there.

Re-exploration says the agent is up to date​

Use:

/explore --force

If the wrong agent is active, run /agent and /agent use <id> first.

Profile and Invocation Problems​

rook does not know how to invoke this agent​

Create and verify a profile:

/profile add
/profile test <name>
Rook scenario list explaining that scenarios are skipped because no profile exists

The profile invokes successfully but extracts the wrong value​

Run /profile show <name> and /profile test <name>. Paste a representative response, then set result.path to the actual answer, not a status, ID, or metadata field.

A required environment variable is missing​

/env list
/env set <VARIABLE_NAME>

The profile should keep ${VARIABLE_NAME}, not the literal secret.

HTTP agent returns 401 or 403​

  • Confirm the profile header scheme and variable name.
  • Confirm the stored value is for the target agent, not the Rook controller.
  • Check whether the endpoint expects a different tenant, scope, audience, or environment.
  • Reproduce the request with /profile curl <name> after safely adding the secret outside shared logs.

TLS works in cURL but not Rook​

The machine may trust a private certificate that Node.js does not. Configure tls.trust: system or an explicit ca_file. Keep -k only when disabling verification is an intentional test-environment decision.

Async agent never completes​

Check:

  • poll.handle_path points into the initial response.
  • The poll request includes required headers.
  • ready_when.json_path and terminal values match the actual response.
  • max_attempts, interval, and timeout allow the expected duration.

Multi-turn scenarios are skipped​

Configure conversation.kind, the response ID path, and how the next request sends or resumes the session. Rook intentionally refuses to simulate multi-turn behavior as independent calls.

Streaming response is skipped​

SSE, NDJSON, and WebSocket response kinds are recorded but not executed in the current release. Use a non-streaming JSON or text endpoint when available.

Scenario and Run Problems​

Nothing matched a selector​

Run /scenarios list. Rook also prints the available classes, categories, and tags after an empty selector. Verify spelling and use commas between values.

Nothing can be attempted​

Read the grouped skip reasons, then fix the first execution blocker:

  • Verified profile
  • Supported text or URL input
  • Readable response type
  • Conversation mapping
  • Required MCP verifier

Native attachment, PR-reference, and image-input delivery are not implemented in the current pre-alpha release.

Usage reporting, tool-call observation, and filesystem observation normally do not prevent invocation. Their affected criteria become Unable to Verify, so improve those evidence sources before treating the result as a complete gate.

Run needs permission in headless mode​

Add an exact reviewed --allow rule. Headless mode cannot answer a prompt. Do not use broad wildcards simply to make CI pass.

File evidence cannot be attributed​

Run with:

/run --concurrency 1

Concurrent scenarios can write the same observed path, so attribution would otherwise be unreliable.

Run stopped midway​

Check run.yaml for the status and stop reason. Budget, authentication, interrupt, and controller failures halt at scenario boundaries. Completed evidence is preserved. Rook does not invent verdicts for scenarios that never ran.

Result and Evidence Problems​

Why is Unable to Verify not Fail?​

It means Rook did not have evidence to decide. Marking it Fail would claim the agent violated a criterion that the harness never observed. Improve observation, then rerun.

The agent says it created something, but Rook cannot verify it​

Add a read-only MCP tool, read endpoint, or filesystem observation. Do not use a create/update tool as a verifier because verification would change state.

Image exists but content is unverifiable​

Rook records file existence, byte size, kind, and supported image dimensions. It does not currently interpret image pixels. Connect an approved image evaluator or accept the explicit content gap.

Old run changed after scenario edits​

Current runs snapshot scenario definitions. If an older pre-alpha run lacks a snapshot, Rook does not fall back to the live store because that would present mutable data as historical evidence.

Browser viewer does not open​

Use:

/ui --no-open

Open the printed http://127.0.0.1:<port> URL manually. Rook tries a range of loopback ports beginning at 7757. Check whether local security software blocks the process.

The viewer runs only while the Rook TUI process is running.

MCP Problems​

Server is pending approval​

Review its raw command and approve the exact project or discovered definition. A changed definition requires reapproval.

Server is unsupported transport​

Only stdio connections execute today. HTTP, SSE, and WebSocket definitions remain visible but unavailable.

Server is enabled but a call still prompts​

Registry enablement and call permission are separate gates. The registry makes the server eligible. The permission prompt authorizes that specific start or tool call.

Server disappeared behind another definition​

Run rook mcp list and inspect origins. A local, project, or user definition may shadow a discovered server with the same name. The discovered row remains visible and is not overwritten.

Running Rook in tmux​

Start a named session:

tmux new-session -s rook-test
rook

Detach without stopping Rook by pressing Ctrl+B, then D.

List sessions:

tmux list-sessions

View and interact with the session again:

tmux attach-session -t rook-test

Capture recent terminal output without attaching:

tmux capture-pane -p -S -200 -t rook-test

Stop the application normally with /exit. If the session contains only disposable test processes and must be terminated, run:

tmux kill-session -t rook-test

Killing a session is abrupt. Prefer /exit so Rook can close its browser viewer and finish boundary cleanup.

Frequently Asked Questions​

Does Rook require source code?​

No. You can explore and test a PRD-only workspace against a remote profile, but source gives better implementation, tool, and verification context.

Can Rook test a remote agent?​

Yes. Keep the code or PRD local for exploration and point an HTTP profile at the authorized remote test endpoint.

Can I give Rook only a GitHub URL?​

Not currently. Clone the repository first.

Can Rook test production?​

Technically a profile can point there, but Rook provides no rollback or write virtualization. The recommended workflow is a disposable test or staging environment.

Does a passing report prove the agent is safe?​

No. It proves only what the selected scenarios and available evidence established. Review:

  • Scenario breadth
  • Coverage
  • Verification gaps
  • Repeatability
  • Target configuration

Where is my data stored?​

Project evidence is under <project>/.testmuai/rook/. Global credentials, settings, variables, and sessions are under ~/.testmuai/rook/, or the directory selected by ROOK_HOME.

Last updated on

Test across 3000+ combinations of browsers, real devices & OS.

×
Schedule Your Personal Demo
Book Demo

Help and Support

Related Articles