Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use Clear method of NUnit.Framework.Constraints.TestDictionary class

Best Nunit code snippet using NUnit.Framework.Constraints.TestDictionary.Clear

TestWrite.cs

Source:TestWrite.cs

...99                 * formatID Set: */100                FileStream out1 = file;101                POIFSFileSystem poiFs = new POIFSFileSystem();102                MutablePropertySet ps = new MutablePropertySet();103                ps.ClearSections();104                ps.AddSection(new MutableSection());105                /* Write it to a POIFS and the latter to disk: */106                try107                {108                    MemoryStream psStream = new MemoryStream();109                    ps.Write(psStream);110                    psStream.Close();111                    byte[] streamData = psStream.ToArray();112                    poiFs.CreateDocument(new MemoryStream(streamData),113                                         SummaryInformation.DEFAULT_STREAM_NAME);114                    poiFs.WriteFileSystem(out1);115                    out1.Close();116                    Assert.Fail("Should have thrown a NoFormatIDException.");117                }118                catch (Exception ex)119                {120                    Assert.IsTrue(ex is NoFormatIDException);121                }122                finally123                {124                    out1.Close();125                }126            }127            try128            {129                File.Delete(fi.FullName);130            }131            catch132            {133            }134        }135        /**136         * Writes an empty property Set to a POIFS and Reads it back137         * in.138         * 139         * @exception IOException if an I/O exception occurs140         * @exception UnsupportedVariantTypeException if HPSF does not yet support141         * a variant type to be written142         */143        [Test]144        public void TestWriteEmptyPropertySet()145        {146            FileInfo fi = TempFile.CreateTempFile(POI_FS, ".doc");147            using (FileStream file = new FileStream(fi.FullName, FileMode.Open, FileAccess.ReadWrite))148            {149                //filename.deleteOnExit();150                /* Create a mutable property Set and Write it to a POIFS: */151                FileStream out1 = file;152                POIFSFileSystem poiFs = new POIFSFileSystem();153                MutablePropertySet ps = new MutablePropertySet();154                MutableSection s = (MutableSection)ps.Sections[0];155                s.SetFormatID(SectionIDMap.SUMMARY_INFORMATION_ID);156                MemoryStream psStream = new MemoryStream();157                ps.Write(psStream);158                psStream.Close();159                byte[] streamData = psStream.ToArray();160                poiFs.CreateDocument(new MemoryStream(streamData),161                                     SummaryInformation.DEFAULT_STREAM_NAME);162                poiFs.WriteFileSystem(out1);163                //out1.Close();164                file.Position = 0;165                /* Read the POIFS: */166                POIFSReader reader3 = new POIFSReader();167                reader3.StreamReaded += new POIFSReaderEventHandler(reader3_StreamReaded);168                reader3.Read(file);169                file.Close();170                //File.Delete(dataDir + POI_FS);171            }172            try173            {174                File.Delete(fi.FullName);175            }176            catch177            {178            }179        }180        void reader3_StreamReaded(object sender, POIFSReaderEventArgs e)181        {182            try183            {184                PropertySetFactory.Create(e.Stream);185            }186            catch (Exception ex)187            {188                Assert.Fail(ex.Message);189            }190        }191        /* Read the POIFS: */192        static PropertySet[] psa = new PropertySet[1];193        /**194         * Writes a simple property Set with a SummaryInformation section to a195         * POIFS and Reads it back in.196         * 197         * @exception IOException if an I/O exception occurs198         * @exception UnsupportedVariantTypeException if HPSF does not yet support199         * a variant type to be written200         */201        [Test]202        public void TestWriteSimplePropertySet()203        {204            String AUTHOR = "Rainer Klute";205            String TITLE = "Test Document";206            FileInfo fi = TempFile.CreateTempFile(POI_FS, ".doc");207            FileStream file = new FileStream(fi.FullName, FileMode.Open, FileAccess.ReadWrite);208            FileStream out1 = file;209            POIFSFileSystem poiFs = new POIFSFileSystem();210            MutablePropertySet ps = new MutablePropertySet();211            MutableSection si = new MutableSection();212            si.SetFormatID(SectionIDMap.SUMMARY_INFORMATION_ID);213            ps.Sections[0] = si;214            MutableProperty p = new MutableProperty();215            p.ID = PropertyIDMap.PID_AUTHOR;216            p.Type = Variant.VT_LPWSTR;217            p.Value = AUTHOR;218            si.SetProperty(p);219            si.SetProperty(PropertyIDMap.PID_TITLE, Variant.VT_LPSTR, TITLE);220            poiFs.CreateDocument(ps.ToInputStream(),221                                 SummaryInformation.DEFAULT_STREAM_NAME);222            poiFs.WriteFileSystem(out1);223            //out1.Close();224            file.Position = 0;225            POIFSReader reader1 = new POIFSReader();226            //reader1.StreamReaded += new POIFSReaderEventHandler(reader1_StreamReaded);227            POIFSReaderListener1 psl = new POIFSReaderListener1();228            reader1.RegisterListener(psl);229            reader1.Read(file);230            Assert.IsNotNull(psa[0]);231            Assert.IsTrue(psa[0].IsSummaryInformation);232            Section s = (Section)(psa[0].Sections[0]);233            Object p1 = s.GetProperty(PropertyIDMap.PID_AUTHOR);234            Object p2 = s.GetProperty(PropertyIDMap.PID_TITLE);235            Assert.AreEqual(AUTHOR, p1);236            Assert.AreEqual(TITLE, p2);237            file.Close();238            try239            {240                File.Delete(fi.FullName);241            }242            catch243            {244            }245        }246        private class POIFSReaderListener1 : POIFSReaderListener247        {248            public void ProcessPOIFSReaderEvent(POIFSReaderEvent e)249            {250                try251                {252                    psa[0] = PropertySetFactory.Create(e.Stream);253                }254                catch (Exception ex)255                {256                    Assert.Fail(ex.Message);257                }258            }259        }260        /**261         * Writes a simple property Set with two sections to a POIFS and Reads it262         * back in.263         * 264         * @exception IOException if an I/O exception occurs265         * @exception WritingNotSupportedException if HPSF does not yet support266         * a variant type to be written267         */268        [Test]269        public void TestWriteTwoSections()270        {271            String STREAM_NAME = "PropertySetStream";272            String SECTION1 = "Section 1";273            String SECTION2 = "Section 2";274            FileInfo fi = TempFile.CreateTempFile(POI_FS, ".doc");275            FileStream file = new FileStream(fi.FullName, FileMode.Open, FileAccess.ReadWrite);276            //filename.deleteOnExit();277            FileStream out1 = file;278            POIFSFileSystem poiFs = new POIFSFileSystem();279            MutablePropertySet ps = new MutablePropertySet();280            ps.ClearSections();281            ClassID formatID = new ClassID();282            formatID.Bytes = new byte[]{0, 1,  2,  3,  4,  5,  6,  7,283                                     8, 9, 10, 11, 12, 13, 14, 15};284            MutableSection s1 = new MutableSection();285            s1.SetFormatID(formatID);286            s1.SetProperty(2, SECTION1);287            ps.AddSection(s1);288            MutableSection s2 = new MutableSection();289            s2.SetFormatID(formatID);290            s2.SetProperty(2, SECTION2);291            ps.AddSection(s2);292            poiFs.CreateDocument(ps.ToInputStream(), STREAM_NAME);293            poiFs.WriteFileSystem(out1);294            //out1.Close();...

DictionaryContainsKeyConstraintTests.cs

Source:DictionaryContainsKeyConstraintTests.cs

...304            public void Add(KeyValuePair<int, string> item)305            {306                throw new NotImplementedException();307            }308            public void Clear()309            {310                throw new NotImplementedException();311            }312            public bool Contains(KeyValuePair<int, string> item)313            {314                throw new NotImplementedException();315            }316            public void CopyTo(KeyValuePair<int, string>[] array, int arrayIndex)317            {318                throw new NotImplementedException();319            }320            public bool Remove(KeyValuePair<int, string> item)321            {322                throw new NotImplementedException();323            }324            public int Count { get; }325            public bool IsReadOnly { get; }326            public bool ContainsKey(int key)327            {328                return key == _key;329            }330            public void Add(int key, string value)331            {332                throw new NotImplementedException();333            }334            public bool Remove(int key)335            {336                throw new NotImplementedException();337            }338            public bool TryGetValue(int key, out string value)339            {340                throw new NotImplementedException();341            }342            public string this[int key]343            {344                get { throw new NotImplementedException(); }345                set { throw new NotImplementedException(); }346            }347            public ICollection<int> Keys { get; }348            public ICollection<string> Values { get; }349        }350        public class TestNonGenericDictionary : IDictionary351        {352            private readonly int _key;353            public TestNonGenericDictionary(int key)354            {355                _key = key;356            }357            public bool Contains(object key)358            {359                return _key == (int)key;360            }361            public void Add(object key, object value)362            {363                throw new NotImplementedException();364            }365            public void Clear()366            {367                throw new NotImplementedException();368            }369            public IDictionaryEnumerator GetEnumerator()370            {371                throw new NotImplementedException();372            }373            public void Remove(object key)374            {375                throw new NotImplementedException();376            }377            public object this[object key]378            {379                get { throw new NotImplementedException(); }380                set { throw new NotImplementedException(); }381            }382            public ICollection Keys { get; }383            public ICollection Values { get; }384            public bool IsReadOnly { get; }385            public bool IsFixedSize { get; }386            IEnumerator IEnumerable.GetEnumerator()387            {388                return GetEnumerator();389            }390            public void CopyTo(Array array, int index)391            {392                throw new NotImplementedException();393            }394            public int Count { get; }395            public object SyncRoot { get; }396            public bool IsSynchronized { get; }397        }398        public class TestLookup : ILookup<int, string>399        {400            private readonly int _key;401            public TestLookup(int key)402            {403                _key = key;404            }405            public IEnumerator<IGrouping<int, string>> GetEnumerator()406            {407                throw new NotImplementedException();408            }409            IEnumerator IEnumerable.GetEnumerator()410            {411                return GetEnumerator();412            }413            public bool Contains(int key)414            {415                return key == _key;416            }417            public int Count { get; }418            public IEnumerable<string> this[int key]419            {420                get { throw new NotImplementedException(); }421            }422        }423#if !(NET35 || NET40)424        public class TestReadOnlyDictionary : IReadOnlyDictionary<string, string>425        {426            private readonly string _key;427            public TestReadOnlyDictionary(string key)428            {429                _key = key;430            }431            public IEnumerator<KeyValuePair<string, string>> GetEnumerator()432            {433                throw new NotImplementedException();434            }435            IEnumerator IEnumerable.GetEnumerator()436            {437                return GetEnumerator();438            }439            public int Count { get; }440            public bool ContainsKey(string key)441            {442                return _key == key;443            }444            public bool TryGetValue(string key, out string value)445            {446                throw new NotImplementedException();447            }448            public string this[string key]449            {450                get { throw new NotImplementedException(); }451            }452            public IEnumerable<string> Keys { get; }453            public IEnumerable<string> Values { get; }454        }455        public class TestSet : ISet<int>456        {457            public IEnumerator<int> GetEnumerator()458            {459                throw new NotImplementedException();460            }461            IEnumerator IEnumerable.GetEnumerator()462            {463                return GetEnumerator();464            }465            void ICollection<int>.Add(int item)466            {467                throw new NotImplementedException();468            }469            public void UnionWith(IEnumerable<int> other)470            {471                throw new NotImplementedException();472            }473            public void IntersectWith(IEnumerable<int> other)474            {475                throw new NotImplementedException();476            }477            public void ExceptWith(IEnumerable<int> other)478            {479                throw new NotImplementedException();480            }481            public void SymmetricExceptWith(IEnumerable<int> other)482            {483                throw new NotImplementedException();484            }485            public bool IsSubsetOf(IEnumerable<int> other)486            {487                throw new NotImplementedException();488            }489            public bool IsSupersetOf(IEnumerable<int> other)490            {491                throw new NotImplementedException();492            }493            public bool IsProperSupersetOf(IEnumerable<int> other)494            {495                throw new NotImplementedException();496            }497            public bool IsProperSubsetOf(IEnumerable<int> other)498            {499                throw new NotImplementedException();500            }501            public bool Overlaps(IEnumerable<int> other)502            {503                throw new NotImplementedException();504            }505            public bool SetEquals(IEnumerable<int> other)506            {507                throw new NotImplementedException();508            }509            bool ISet<int>.Add(int item)510            {511                throw new NotImplementedException();512            }513            public void Clear()514            {515                throw new NotImplementedException();516            }517            public bool Contains(int item)518            {519                throw new NotImplementedException();520            }521            public void CopyTo(int[] array, int arrayIndex)522            {523                throw new NotImplementedException();524            }525            public bool Remove(int item)526            {527                throw new NotImplementedException();...

DictionaryContainsKeyValueConstraintTests.cs

Source:DictionaryContainsKeyValueConstraintTests.cs

...102            public void Add(KeyValuePair<int, string> item)103            {104                throw new System.NotImplementedException();105            }106            public void Clear()107            {108                throw new System.NotImplementedException();109            }110            public bool Contains(KeyValuePair<int, string> item)111            {112                throw new System.NotImplementedException();113            }114            public bool ContainsKey(int key)115            {116                throw new System.NotImplementedException();117            }118            public void CopyTo(KeyValuePair<int, string>[] array, int arrayIndex)119            {120                throw new System.NotImplementedException();...

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System;4using System.Collections.Generic;5using System.Linq;6using System.Text;7using System.Threading.Tasks;8{9    {10        static void Main(string[] args)11        {12            TestDictionary td = new TestDictionary();13            td.Add("key", "value");14            td.Clear();15            Console.WriteLine(td.Count);16            Console.ReadLine();17        }18    }19}

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System.Collections;4using System.Collections.Generic;5{6    {7        public void TestMethod1()8        {9            var dict = new TestDictionary(new Dictionary<string, string> { { "key1", "value1" }, { "key2", "value2" } });10            dict.Clear();11            Assert.That(dict.Count, Is.EqualTo(0));12        }13    }14}15using NUnit.Framework;16using NUnit.Framework.Constraints;17using System.Collections;18using System.Collections.Generic;19{20    {21        public void TestMethod1()22        {23            var dict = new TestDictionary(new Dictionary<string, string> { { "key1", "value1" }, { "key2", "value2" } });24            dict.Clear();25            Assert.That(dict.Count, Is.EqualTo(0));26        }27    }28}29using NUnit.Framework;30using NUnit.Framework.Constraints;31using System.Collections;32using System.Collections.Generic;33{34    {35        public void TestMethod1()36        {37            var dict = new TestDictionary(new Dictionary<string, string> { { "key1", "value1" }, { "key2", "value2" } });38            dict.Clear();39            Assert.That(dict.Count, Is.EqualTo(0));40        }41    }42}43using NUnit.Framework;44using NUnit.Framework.Constraints;45using System.Collections;46using System.Collections.Generic;47{48    {49        public void TestMethod1()50        {51            var dict = new TestDictionary(new Dictionary<string, string> { { "key1", "value1" }, { "key2", "value2" } });52            dict.Clear();53            Assert.That(dict.Count, Is.EqualTo(0));54        }55    }56}

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System.Collections;4{5    {6        public void TestMethod()7        {8            TestDictionary testDictionary = new TestDictionary();9            testDictionary.Clear();10        }11    }12}13using NUnit.Framework;14using NUnit.Framework.Constraints;15using System.Collections;16{17    {18        public void TestMethod()19        {20            TestDictionary testDictionary = new TestDictionary();21            testDictionary.Contains("test");22        }23    }24}25using NUnit.Framework;26using NUnit.Framework.Constraints;27using System.Collections;28{29    {30        public void TestMethod()31        {32            TestDictionary testDictionary = new TestDictionary();33            testDictionary.CopyTo(new DictionaryEntry[0], 0);34        }35    }36}37using NUnit.Framework;38using NUnit.Framework.Constraints;39using System.Collections;40{41    {42        public void TestMethod()43        {44            TestDictionary testDictionary = new TestDictionary();45            testDictionary.GetEnumerator();46        }47    }48}49using NUnit.Framework;50using NUnit.Framework.Constraints;51using System.Collections;52{53    {54        public void TestMethod()55        {56            TestDictionary testDictionary = new TestDictionary();57            testDictionary.Remove("test");58        }59    }60}61using NUnit.Framework;62using NUnit.Framework.Constraints;63using System.Collections;64{65    {66        public void TestMethod()67        {

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System.Collections;4{5    {6        public void TestMethod1()7        {8            TestDictionary td = new TestDictionary();9            td.Clear();10        }11    }12}13using NUnit.Framework;14using NUnit.Framework.Constraints;15using System.Collections;16{17    {18        public void TestMethod1()19        {20            TestList tl = new TestList();21            tl.Clear();22        }23    }24}25using NUnit.Framework;26using NUnit.Framework.Constraints;27using System.Collections;28{29    {30        public void TestMethod1()31        {32            TestQueue tq = new TestQueue();33            tq.Clear();34        }35    }36}37using NUnit.Framework;38using NUnit.Framework.Constraints;39using System.Collections;40{41    {42        public void TestMethod1()43        {44            TestStack ts = new TestStack();45            ts.Clear();46        }47    }48}49using NUnit.Framework;50using NUnit.Framework.Constraints;51using System.Collections;52{53    {54        public void TestMethod1()55        {56            TestString ts = new TestString();57            ts.Clear();58        }59    }60}61using NUnit.Framework;62using NUnit.Framework.Constraints;63using System.Collections;64{65    {66        public void TestMethod1()67        {68            TestValue tv = new TestValue();69            tv.Clear();70        }

Clear

Using AI Code Generation

1using NUnit.Framework;2using System.Collections;3{4    {5        public void TestMethod1()6        {7            TestDictionary testDict = new TestDictionary();8            testDict.Add("a", "b");9            testDict.Add("c", "d");10            testDict.Clear();11            Assert.AreEqual(0, testDict.Count);12        }13    }14}15using NUnit.Framework;16using System.Collections;17{18    {19        public void TestMethod1()20        {21            TestDictionary testDict = new TestDictionary();22            testDict.Add("a", "b");23            testDict.Add("c", "d");24            Assert.AreEqual(2, testDict.Count);25        }26    }27}28using NUnit.Framework;29using System.Collections;30{31    {32        public void TestMethod1()33        {34            TestDictionary testDict = new TestDictionary();35            testDict.Add("a", "b");36            testDict.Add("c", "d");37            Assert.AreEqual(true, testDict.ContainsKey("a"));38        }39    }40}41using NUnit.Framework;42using System.Collections;43{44    {45        public void TestMethod1()46        {47            TestDictionary testDict = new TestDictionary();48            testDict.Add("a", "b");49            testDict.Add("c", "d");50            Assert.AreEqual(true, testDict.ContainsValue("b"));51        }52    }53}54using NUnit.Framework;55using System.Collections;56{57    {58        public void TestMethod1()59        {60            TestDictionary testDict = new TestDictionary();61            testDict.Add("a", "b");62            testDict.Add("c", "d");

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System;4using System.Collections.Generic;5{6    {7        static void Main(string[] args)8        {9            TestDictionary test = new TestDictionary();10            test.Clear();11        }12    }13}14using NUnit.Framework;15using NUnit.Framework.Constraints;16using System;17using System.Collections.Generic;18{19    {20        public void Clear()21        {22            Dictionary<string, string> dictionary = new Dictionary<string, string>();23            dictionary.Add("1", "one");24            dictionary.Add("2", "two");25            dictionary.Add("3", "three");26            dictionary.Add("4", "four");27            dictionary.Add("5", "five");28            dictionary.Clear();29            Assert.That(dictionary.Count, Is.EqualTo(0));30        }31    }32}33NUnit Console Runner 3.12.0 (.NET 5.0.0)34Copyright (c) 2018 Charlie Poole, Rob Prouse35  CLR Version: 5.0.0 (clr-5.0.20.51904)36Results (nunit3) saved as TestResult.xml

Clear

Using AI Code Generation

1using NUnit.Framework;2using NUnit.Framework.Constraints;3using System.Collections;4{5    {6        public void TestMethod1()7        {8            TestDictionary td = new TestDictionary();9            td.Add("a", "b");10            td.Add("c", "d");11            td.Clear();12            Assert.AreEqual(0, td.Count);13        }14    }15}

Clear

Using AI Code Generation

1using NUnit.Framework;2using System;3using System.Collections.Generic;4using System.Linq;5using System.Text;6{7    {8        public void TestClear()9        {10            TestDictionary<string, string> objTestDictionary = new TestDictionary<string, string>();11            objTestDictionary.Add("key1", "value1");12            objTestDictionary.Add("key2", "value2");13            objTestDictionary.Clear();14            Assert.AreEqual(0, objTestDictionary.Count);15        }16    }17}18using NUnit.Framework;19using System;20using System.Collections.Generic;21using System.Linq;22using System.Text;23{24    {25        public void TestContainsKey()26        {27            TestDictionary<string, string> objTestDictionary = new TestDictionary<string, string>();28            objTestDictionary.Add("key1", "value1");29            objTestDictionary.Add("key2", "value2");30            Assert.AreEqual(true, objTestDictionary.ContainsKey("key1"));31        }32    }33}34using NUnit.Framework;35using System;36using System.Collections.Generic;37using System.Linq;38using System.Text;39{40    {41        public void TestContainsValue()42        {43            TestDictionary<string, string> objTestDictionary = new TestDictionary<string, string>();44            objTestDictionary.Add("key1", "value1");45            objTestDictionary.Add("key2", "value2");46            Assert.AreEqual(true, objTestDictionary.ContainsValue("value1"));47        }48    }49}50using NUnit.Framework;51using System;52using System.Collections.Generic;53using System.Linq;54using System.Text;55{56    {57        public void TestCopyTo()58        {59            TestDictionary<string, string> objTestDictionary = new TestDictionary<string, string>();60            objTestDictionary.Add("key1", "value1");61            objTestDictionary.Add("key2", "value2

Clear

Using AI Code Generation

1using System;2using System.Collections;3using NUnit.Framework.Constraints;4{5    {6        static void Main(string[] args)7        {8            TestDictionary openWith = new TestDictionary();9            openWith.Add("txt", "notepad.exe");10            openWith.Add("bmp", "paint.exe");11            openWith.Add("dib", "paint.exe");12            openWith.Add("rtf", "wordpad.exe");13            openWith.Add("txt", "winword.exe");14            openWith.Add("doc", "winword.exe");15            openWith.Add("docx", "winword.exe");16            {17                openWith.Add("txt", "winword.exe");18            }19            catch (ArgumentException)20            {21                Console.WriteLine("An element with Key = \"txt\" already exists.");22            }23            Console.WriteLine("For key = \"rtf\", value = {0}.", openWith["rtf"]);

Clear

Using AI Code Generation

1using NUnit.Framework;2using System.Collections;3using System.Collections.Specialized;4{5    {6        public void TestClear()7        {8            TestDictionary testDictionary = new TestDictionary();9            testDictionary.Clear();10        }11    }12}

Nunit tutorial

Nunit is a well-known open-source unit testing framework for C#. This framework is easy to work with and user-friendly. LambdaTest’s NUnit Testing Tutorial provides a structured and detailed learning environment to help you leverage knowledge about the NUnit framework. The NUnit tutorial covers chapters from basics such as environment setup to annotations, assertions, Selenium WebDriver commands, and parallel execution using the NUnit framework.

Chapters

NUnit Environment Setup - All the prerequisites and setup environments are provided to help you begin with NUnit testing.
NUnit With Selenium - Learn how to use the NUnit framework with Selenium for automation testing and its installation.
Selenium WebDriver Commands in NUnit - Leverage your knowledge about the top 28 Selenium WebDriver Commands in NUnit For Test Automation. It covers web browser commands, web element commands, and drop-down commands.
NUnit Parameterized Unit Tests - Tests on varied combinations may lead to code duplication or redundancy. This chapter discusses how NUnit Parameterized Unit Tests and their methods can help avoid code duplication.
NUnit Asserts - Learn about the usage of assertions in NUnit using Selenium
NUnit Annotations - Learn how to use and execute NUnit annotations for Selenium Automation Testing
Generating Test Reports In NUnit - Understand how to use extent reports and generate reports with NUnit and Selenium WebDriver. Also, look into how to capture screenshots in NUnit extent reports.
Parallel Execution In NUnit - Parallel testing helps to reduce time consumption while executing a test. Deep dive into the concept of Specflow Parallel Execution in NUnit.