Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use create_access_point method in localstack

Best Python code snippet using localstack_python

ap_dht.py

Source:ap_dht.py

...17SENSOR              = dht.DHT22(Pin(4))  # GPIO18SENSOR_ERROR_VALUE  = -273.15192021def create_access_point(22    ssid: str       = AP_SSID,23    password: str   = AP_PASSWORD,24    ip_address: str = AP_IP_ADDRESS,25    hidden: bool    = AP_HIDDEN26) -> None:27    print(f"Creating Access Point: ssid[{ssid}]...")28    ap = WLAN(AP_IF)29    ap.active(True)30    c = ap.ifconfig()  # tuple: (IP address, Subnet mask, Gateway, DNS server)31    ap.ifconfig((ip_address, c[1], c[2], c[3]))32    ap.config(essid=ssid, password=password, hidden=hidden)33    while not ap.active():34        sleep(1)35        print(f"Creating Access Point: ssid[{ssid}]...")36    print(f"Access Point created. Config: {ap.ifconfig()}")373839def run_http_server(sensor: dht.DHTBase = SENSOR) -> None:40    addr_info   = socket.getaddrinfo("0.0.0.0", 80)41    addr        = addr_info[0][-1]42    skt         = socket.socket(socket.AF_INET, socket.SOCK_STREAM)43    skt.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)44    skt.bind(addr)45    skt.listen(5)46    print(f"Listening..., bind address info: {addr_info}")4748    while True:49        conn, addr = skt.accept()50        data = {"temp": SENSOR_ERROR_VALUE, "rh": SENSOR_ERROR_VALUE}51        try:52            sensor.measure()53            data["temp"] = sensor.temperature()54            data["rh"]   = sensor.humidity()55        except:56            pass5758        conn.recv(1024)59        conn.write(json.dumps(data))60        conn.close()616263if __name__ == "__main__":64    create_access_point()
...

core.py

Source:core.py

...10numbers = '123456789'11ls1 = list(symbols)12ls2 = list(symbols_countable)13ls3 = list(numbers)14def create_access_point(mac, name, channel):15    command = 'airbase-ng -a ' + mac + ' --essid "' + name + '" -c ' + channel + ' wlan0mon'16    system('gnome-terminal -e "' + command + '"')17def main(access_points):18    for point in range(access_points):19        random.shuffle(ls1)20        random.shuffle(ls2)21        random.shuffle(ls3)22        part1 = ''.join([random.choice(ls2) for m in range(2)])23        part2 = ''.join([random.choice(ls1) for m in range(2)])24        part3 = ''.join([random.choice(ls1) for m in range(2)])25        part4 = ''.join([random.choice(ls1) for m in range(2)])26        part5 = ''.join([random.choice(ls1) for m in range(2)])27        part6 = ''.join([random.choice(ls1) for m in range(2)])28        name = ''.join([random.choice(ls1) for n in range(10)])29        channel = ''.join([random.choice(ls3) for c in range(1)])30        mac = part1 + ':' + part2 + ':' + part3 + ':' + part4 + ':' + part5 + ':' + part631        create_access_point(mac, name, channel)32def killall():...

wifi.py

Source:wifi.py

...9    CONNECTED = False10    def __init__(self, *args, **kwargs):11        self.nic = None12        # super(WifiManager, self).__init__(*args, **kwargs)13    def create_access_point(self):14        self.nic = network.WLAN(network.AP_IF)15        self.nic.active(True)16        self.nic.ifconfig(conf.AP_DHCP_SETTING)17        log.info("Settings: {}".format(ujson.dumps(conf.AP_DHCP_SETTING)))18        self.nic.config(essid=conf.AP_WIFI_SSID, authmode=network.AUTH_WPA_WPA2_PSK, password=conf.AP_WIFI_PASS, **conf.AP_OPTIONS)19        log.info("Wifi: {} as WPA_WPA2_PSK {}".format(conf.AP_WIFI_SSID, ujson.dumps(conf.AP_OPTIONS)))20    @classmethod21    def connect_to_wifi(self):22        wlan = network.WLAN(network.STA_IF)  # create station interface23        wlan.active(True)24        if wlan.isconnected() == True:25            log.info("Already connected to {}".format(ssid))26        wlan.connect(conf.WIFI_SSID, conf.WIFI_PASS)27        while not wlan.isconnected():28            machine.idle()29def start():30    wifi_manager = WifiManager()31    wifi_manager.create_access_point()32def connect():...

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.