How to use Get method of compiler Package

Best K6 code snippet using compiler.Get

plugin.pb.go

Source:plugin.pb.go

...137// Deprecated: Use Version.ProtoReflect.Descriptor instead.138func (*Version) Descriptor() ([]byte, []int) {139	return file_google_protobuf_compiler_plugin_proto_rawDescGZIP(), []int{0}140}141func (x *Version) GetMajor() int32 {142	if x != nil && x.Major != nil {143		return *x.Major144	}145	return 0146}147func (x *Version) GetMinor() int32 {148	if x != nil && x.Minor != nil {149		return *x.Minor150	}151	return 0152}153func (x *Version) GetPatch() int32 {154	if x != nil && x.Patch != nil {155		return *x.Patch156	}157	return 0158}159func (x *Version) GetSuffix() string {160	if x != nil && x.Suffix != nil {161		return *x.Suffix162	}163	return ""164}165// An encoded CodeGeneratorRequest is written to the plugin's stdin.166type CodeGeneratorRequest struct {167	state         protoimpl.MessageState168	sizeCache     protoimpl.SizeCache169	unknownFields protoimpl.UnknownFields170	// The .proto files that were explicitly listed on the command-line.  The171	// code generator should generate code only for these files.  Each file's172	// descriptor will be included in proto_file, below.173	FileToGenerate []string `protobuf:"bytes,1,rep,name=file_to_generate,json=fileToGenerate" json:"file_to_generate,omitempty"`174	// The generator parameter passed on the command-line.175	Parameter *string `protobuf:"bytes,2,opt,name=parameter" json:"parameter,omitempty"`176	// FileDescriptorProtos for all files in files_to_generate and everything177	// they import.  The files will appear in topological order, so each file178	// appears before any file that imports it.179	//180	// protoc guarantees that all proto_files will be written after181	// the fields above, even though this is not technically guaranteed by the182	// protobuf wire format.  This theoretically could allow a plugin to stream183	// in the FileDescriptorProtos and handle them one by one rather than read184	// the entire set into memory at once.  However, as of this writing, this185	// is not similarly optimized on protoc's end -- it will store all fields in186	// memory at once before sending them to the plugin.187	//188	// Type names of fields and extensions in the FileDescriptorProto are always189	// fully qualified.190	ProtoFile []*descriptorpb.FileDescriptorProto `protobuf:"bytes,15,rep,name=proto_file,json=protoFile" json:"proto_file,omitempty"`191	// The version number of protocol compiler.192	CompilerVersion *Version `protobuf:"bytes,3,opt,name=compiler_version,json=compilerVersion" json:"compiler_version,omitempty"`193}194func (x *CodeGeneratorRequest) Reset() {195	*x = CodeGeneratorRequest{}196	if protoimpl.UnsafeEnabled {197		mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[1]198		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))199		ms.StoreMessageInfo(mi)200	}201}202func (x *CodeGeneratorRequest) String() string {203	return protoimpl.X.MessageStringOf(x)204}205func (*CodeGeneratorRequest) ProtoMessage() {}206func (x *CodeGeneratorRequest) ProtoReflect() protoreflect.Message {207	mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[1]208	if protoimpl.UnsafeEnabled && x != nil {209		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))210		if ms.LoadMessageInfo() == nil {211			ms.StoreMessageInfo(mi)212		}213		return ms214	}215	return mi.MessageOf(x)216}217// Deprecated: Use CodeGeneratorRequest.ProtoReflect.Descriptor instead.218func (*CodeGeneratorRequest) Descriptor() ([]byte, []int) {219	return file_google_protobuf_compiler_plugin_proto_rawDescGZIP(), []int{1}220}221func (x *CodeGeneratorRequest) GetFileToGenerate() []string {222	if x != nil {223		return x.FileToGenerate224	}225	return nil226}227func (x *CodeGeneratorRequest) GetParameter() string {228	if x != nil && x.Parameter != nil {229		return *x.Parameter230	}231	return ""232}233func (x *CodeGeneratorRequest) GetProtoFile() []*descriptorpb.FileDescriptorProto {234	if x != nil {235		return x.ProtoFile236	}237	return nil238}239func (x *CodeGeneratorRequest) GetCompilerVersion() *Version {240	if x != nil {241		return x.CompilerVersion242	}243	return nil244}245// The plugin writes an encoded CodeGeneratorResponse to stdout.246type CodeGeneratorResponse struct {247	state         protoimpl.MessageState248	sizeCache     protoimpl.SizeCache249	unknownFields protoimpl.UnknownFields250	// Error message.  If non-empty, code generation failed.  The plugin process251	// should exit with status code zero even if it reports an error in this way.252	//253	// This should be used to indicate errors in .proto files which prevent the254	// code generator from generating correct code.  Errors which indicate a255	// problem in protoc itself -- such as the input CodeGeneratorRequest being256	// unparseable -- should be reported by writing a message to stderr and257	// exiting with a non-zero status code.258	Error *string `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`259	// A bitmask of supported features that the code generator supports.260	// This is a bitwise "or" of values from the Feature enum.261	SupportedFeatures *uint64                       `protobuf:"varint,2,opt,name=supported_features,json=supportedFeatures" json:"supported_features,omitempty"`262	File              []*CodeGeneratorResponse_File `protobuf:"bytes,15,rep,name=file" json:"file,omitempty"`263}264func (x *CodeGeneratorResponse) Reset() {265	*x = CodeGeneratorResponse{}266	if protoimpl.UnsafeEnabled {267		mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[2]268		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))269		ms.StoreMessageInfo(mi)270	}271}272func (x *CodeGeneratorResponse) String() string {273	return protoimpl.X.MessageStringOf(x)274}275func (*CodeGeneratorResponse) ProtoMessage() {}276func (x *CodeGeneratorResponse) ProtoReflect() protoreflect.Message {277	mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[2]278	if protoimpl.UnsafeEnabled && x != nil {279		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))280		if ms.LoadMessageInfo() == nil {281			ms.StoreMessageInfo(mi)282		}283		return ms284	}285	return mi.MessageOf(x)286}287// Deprecated: Use CodeGeneratorResponse.ProtoReflect.Descriptor instead.288func (*CodeGeneratorResponse) Descriptor() ([]byte, []int) {289	return file_google_protobuf_compiler_plugin_proto_rawDescGZIP(), []int{2}290}291func (x *CodeGeneratorResponse) GetError() string {292	if x != nil && x.Error != nil {293		return *x.Error294	}295	return ""296}297func (x *CodeGeneratorResponse) GetSupportedFeatures() uint64 {298	if x != nil && x.SupportedFeatures != nil {299		return *x.SupportedFeatures300	}301	return 0302}303func (x *CodeGeneratorResponse) GetFile() []*CodeGeneratorResponse_File {304	if x != nil {305		return x.File306	}307	return nil308}309// Represents a single generated file.310type CodeGeneratorResponse_File struct {311	state         protoimpl.MessageState312	sizeCache     protoimpl.SizeCache313	unknownFields protoimpl.UnknownFields314	// The file name, relative to the output directory.  The name must not315	// contain "." or ".." components and must be relative, not be absolute (so,316	// the file cannot lie outside the output directory).  "/" must be used as317	// the path separator, not "\".318	//319	// If the name is omitted, the content will be appended to the previous320	// file.  This allows the generator to break large files into small chunks,321	// and allows the generated text to be streamed back to protoc so that large322	// files need not reside completely in memory at one time.  Note that as of323	// this writing protoc does not optimize for this -- it will read the entire324	// CodeGeneratorResponse before writing files to disk.325	Name *string `protobuf:"bytes,1,opt,name=name" json:"name,omitempty"`326	// If non-empty, indicates that the named file should already exist, and the327	// content here is to be inserted into that file at a defined insertion328	// point.  This feature allows a code generator to extend the output329	// produced by another code generator.  The original generator may provide330	// insertion points by placing special annotations in the file that look331	// like:332	//   @@protoc_insertion_point(NAME)333	// The annotation can have arbitrary text before and after it on the line,334	// which allows it to be placed in a comment.  NAME should be replaced with335	// an identifier naming the point -- this is what other generators will use336	// as the insertion_point.  Code inserted at this point will be placed337	// immediately above the line containing the insertion point (thus multiple338	// insertions to the same point will come out in the order they were added).339	// The double-@ is intended to make it unlikely that the generated code340	// could contain things that look like insertion points by accident.341	//342	// For example, the C++ code generator places the following line in the343	// .pb.h files that it generates:344	//   // @@protoc_insertion_point(namespace_scope)345	// This line appears within the scope of the file's package namespace, but346	// outside of any particular class.  Another plugin can then specify the347	// insertion_point "namespace_scope" to generate additional classes or348	// other declarations that should be placed in this scope.349	//350	// Note that if the line containing the insertion point begins with351	// whitespace, the same whitespace will be added to every line of the352	// inserted text.  This is useful for languages like Python, where353	// indentation matters.  In these languages, the insertion point comment354	// should be indented the same amount as any inserted code will need to be355	// in order to work correctly in that context.356	//357	// The code generator that generates the initial file and the one which358	// inserts into it must both run as part of a single invocation of protoc.359	// Code generators are executed in the order in which they appear on the360	// command line.361	//362	// If |insertion_point| is present, |name| must also be present.363	InsertionPoint *string `protobuf:"bytes,2,opt,name=insertion_point,json=insertionPoint" json:"insertion_point,omitempty"`364	// The file contents.365	Content *string `protobuf:"bytes,15,opt,name=content" json:"content,omitempty"`366}367func (x *CodeGeneratorResponse_File) Reset() {368	*x = CodeGeneratorResponse_File{}369	if protoimpl.UnsafeEnabled {370		mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[3]371		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))372		ms.StoreMessageInfo(mi)373	}374}375func (x *CodeGeneratorResponse_File) String() string {376	return protoimpl.X.MessageStringOf(x)377}378func (*CodeGeneratorResponse_File) ProtoMessage() {}379func (x *CodeGeneratorResponse_File) ProtoReflect() protoreflect.Message {380	mi := &file_google_protobuf_compiler_plugin_proto_msgTypes[3]381	if protoimpl.UnsafeEnabled && x != nil {382		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))383		if ms.LoadMessageInfo() == nil {384			ms.StoreMessageInfo(mi)385		}386		return ms387	}388	return mi.MessageOf(x)389}390// Deprecated: Use CodeGeneratorResponse_File.ProtoReflect.Descriptor instead.391func (*CodeGeneratorResponse_File) Descriptor() ([]byte, []int) {392	return file_google_protobuf_compiler_plugin_proto_rawDescGZIP(), []int{2, 0}393}394func (x *CodeGeneratorResponse_File) GetName() string {395	if x != nil && x.Name != nil {396		return *x.Name397	}398	return ""399}400func (x *CodeGeneratorResponse_File) GetInsertionPoint() string {401	if x != nil && x.InsertionPoint != nil {402		return *x.InsertionPoint403	}404	return ""405}406func (x *CodeGeneratorResponse_File) GetContent() string {407	if x != nil && x.Content != nil {408		return *x.Content409	}410	return ""411}412var File_google_protobuf_compiler_plugin_proto protoreflect.FileDescriptor413var file_google_protobuf_compiler_plugin_proto_rawDesc = []byte{414	0x0a, 0x25, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2f, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75,415	0x66, 0x2f, 0x63, 0x6f, 0x6d, 0x70, 0x69, 0x6c, 0x65, 0x72, 0x2f, 0x70, 0x6c, 0x75, 0x67, 0x69,416	0x6e, 0x2e, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x12, 0x18, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2e,417	0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62, 0x75, 0x66, 0x2e, 0x63, 0x6f, 0x6d, 0x70, 0x69, 0x6c, 0x65,418	0x72, 0x1a, 0x20, 0x67, 0x6f, 0x6f, 0x67, 0x6c, 0x65, 0x2f, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x62,419	0x75, 0x66, 0x2f, 0x64, 0x65, 0x73, 0x63, 0x72, 0x69, 0x70, 0x74, 0x6f, 0x72, 0x2e, 0x70, 0x72,420	0x6f, 0x74, 0x6f, 0x22, 0x63, 0x0a, 0x07, 0x56, 0x65, 0x72, 0x73, 0x69, 0x6f, 0x6e, 0x12, 0x14,...

compiler.go

Source:compiler.go

1// Copyright 2019 The Android Open Source Project2//3// Licensed under the Apache License, Version 2.0 (the "License");4// you may not use this file except in compliance with the License.5// You may obtain a copy of the License at6//7//     http://www.apache.org/licenses/LICENSE-2.08//9// Unless required by applicable law or agreed to in writing, software10// distributed under the License is distributed on an "AS IS" BASIS,11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.12// See the License for the specific language governing permissions and13// limitations under the License.14package rust15import (16	"fmt"17	"path/filepath"18	"github.com/google/blueprint/proptools"19	"android/soong/android"20	"android/soong/rust/config"21)22func getEdition(compiler *baseCompiler) string {23	return proptools.StringDefault(compiler.Properties.Edition, config.DefaultEdition)24}25func getDenyWarnings(compiler *baseCompiler) bool {26	return BoolDefault(compiler.Properties.Deny_warnings, config.DefaultDenyWarnings)27}28func (compiler *baseCompiler) setNoStdlibs() {29	compiler.Properties.No_stdlibs = proptools.BoolPtr(true)30}31func NewBaseCompiler(dir, dir64 string, location installLocation) *baseCompiler {32	return &baseCompiler{33		Properties: BaseCompilerProperties{},34		dir:        dir,35		dir64:      dir64,36		location:   location,37	}38}39type installLocation int40const (41	InstallInSystem installLocation = 042	InstallInData                   = iota43)44type BaseCompilerProperties struct {45	// whether to pass "-D warnings" to rustc. Defaults to true.46	Deny_warnings *bool47	// flags to pass to rustc48	Flags []string `android:"path,arch_variant"`49	// flags to pass to the linker50	Ld_flags []string `android:"path,arch_variant"`51	// list of rust rlib crate dependencies52	Rlibs []string `android:"arch_variant"`53	// list of rust dylib crate dependencies54	Dylibs []string `android:"arch_variant"`55	// list of rust proc_macro crate dependencies56	Proc_macros []string `android:"arch_variant"`57	// list of C shared library dependencies58	Shared_libs []string `android:"arch_variant"`59	// list of C static library dependencies60	Static_libs []string `android:"arch_variant"`61	// crate name, required for libraries. This must be the expected extern crate name used in source62	Crate_name string `android:"arch_variant"`63	// list of features to enable for this crate64	Features []string `android:"arch_variant"`65	// specific rust edition that should be used if the default version is not desired66	Edition *string `android:"arch_variant"`67	// sets name of the output68	Stem *string `android:"arch_variant"`69	// append to name of output70	Suffix *string `android:"arch_variant"`71	// install to a subdirectory of the default install path for the module72	Relative_install_path *string `android:"arch_variant"`73	// whether to suppress inclusion of standard crates - defaults to false74	No_stdlibs *bool75}76type baseCompiler struct {77	Properties    BaseCompilerProperties78	pathDeps      android.Paths79	rustFlagsDeps android.Paths80	linkFlagsDeps android.Paths81	flags         string82	linkFlags     string83	depFlags      []string84	linkDirs      []string85	edition       string86	src           android.Path //rustc takes a single src file87	// Install related88	dir      string89	dir64    string90	subDir   string91	relative string92	path     android.InstallPath93	location installLocation94}95var _ compiler = (*baseCompiler)(nil)96func (compiler *baseCompiler) inData() bool {97	return compiler.location == InstallInData98}99func (compiler *baseCompiler) compilerProps() []interface{} {100	return []interface{}{&compiler.Properties}101}102func (compiler *baseCompiler) featuresToFlags(features []string) []string {103	flags := []string{}104	for _, feature := range features {105		flags = append(flags, "--cfg 'feature=\""+feature+"\"'")106	}107	return flags108}109func (compiler *baseCompiler) compilerFlags(ctx ModuleContext, flags Flags) Flags {110	if getDenyWarnings(compiler) {111		flags.RustFlags = append(flags.RustFlags, "-D warnings")112	}113	flags.RustFlags = append(flags.RustFlags, compiler.Properties.Flags...)114	flags.RustFlags = append(flags.RustFlags, compiler.featuresToFlags(compiler.Properties.Features)...)115	flags.RustFlags = append(flags.RustFlags, "--edition="+getEdition(compiler))116	flags.LinkFlags = append(flags.LinkFlags, compiler.Properties.Ld_flags...)117	flags.GlobalRustFlags = append(flags.GlobalRustFlags, config.GlobalRustFlags...)118	flags.GlobalRustFlags = append(flags.GlobalRustFlags, ctx.toolchain().ToolchainRustFlags())119	flags.GlobalLinkFlags = append(flags.GlobalLinkFlags, ctx.toolchain().ToolchainLinkFlags())120	if ctx.Host() && !ctx.Windows() {121		rpath_prefix := `\$$ORIGIN/`122		if ctx.Darwin() {123			rpath_prefix = "@loader_path/"124		}125		var rpath string126		if ctx.toolchain().Is64Bit() {127			rpath = "lib64"128		} else {129			rpath = "lib"130		}131		flags.LinkFlags = append(flags.LinkFlags, "-Wl,-rpath,"+rpath_prefix+rpath)132		flags.LinkFlags = append(flags.LinkFlags, "-Wl,-rpath,"+rpath_prefix+"../"+rpath)133	}134	return flags135}136func (compiler *baseCompiler) compile(ctx ModuleContext, flags Flags, deps PathDeps) android.Path {137	panic(fmt.Errorf("baseCrater doesn't know how to crate things!"))138}139func (compiler *baseCompiler) compilerDeps(ctx DepsContext, deps Deps) Deps {140	deps.Rlibs = append(deps.Rlibs, compiler.Properties.Rlibs...)141	deps.Dylibs = append(deps.Dylibs, compiler.Properties.Dylibs...)142	deps.ProcMacros = append(deps.ProcMacros, compiler.Properties.Proc_macros...)143	deps.StaticLibs = append(deps.StaticLibs, compiler.Properties.Static_libs...)144	deps.SharedLibs = append(deps.SharedLibs, compiler.Properties.Shared_libs...)145	if !Bool(compiler.Properties.No_stdlibs) {146		for _, stdlib := range config.Stdlibs {147			// If we're building for host, use the compiler's stdlibs148			if ctx.Host() {149				stdlib = stdlib + "_" + ctx.toolchain().RustTriple()150			}151			// This check is technically insufficient - on the host, where152			// static linking is the default, if one of our static153			// dependencies uses a dynamic library, we need to dynamically154			// link the stdlib as well.155			if (len(deps.Dylibs) > 0) || (!ctx.Host()) {156				// Dynamically linked stdlib157				deps.Dylibs = append(deps.Dylibs, stdlib)158			}159		}160	}161	return deps162}163func (compiler *baseCompiler) bionicDeps(ctx DepsContext, deps Deps) Deps {164	deps.SharedLibs = append(deps.SharedLibs, "liblog")165	deps.SharedLibs = append(deps.SharedLibs, "libc")166	deps.SharedLibs = append(deps.SharedLibs, "libm")167	deps.SharedLibs = append(deps.SharedLibs, "libdl")168	//TODO(b/141331117) libstd requires libgcc on Android169	deps.StaticLibs = append(deps.StaticLibs, "libgcc")170	return deps171}172func (compiler *baseCompiler) crateName() string {173	return compiler.Properties.Crate_name174}175func (compiler *baseCompiler) installDir(ctx ModuleContext) android.InstallPath {176	dir := compiler.dir177	if ctx.toolchain().Is64Bit() && compiler.dir64 != "" {178		dir = compiler.dir64179	}180	if !ctx.Host() || ctx.Target().NativeBridge == android.NativeBridgeEnabled {181		dir = filepath.Join(dir, ctx.Arch().ArchType.String())182	}183	return android.PathForModuleInstall(ctx, dir, compiler.subDir,184		compiler.relativeInstallPath(), compiler.relative)185}186func (compiler *baseCompiler) install(ctx ModuleContext, file android.Path) {187	compiler.path = ctx.InstallFile(compiler.installDir(ctx), file.Base(), file)188}189func (compiler *baseCompiler) getStem(ctx ModuleContext) string {190	return compiler.getStemWithoutSuffix(ctx) + String(compiler.Properties.Suffix)191}192func (compiler *baseCompiler) getStemWithoutSuffix(ctx BaseModuleContext) string {193	stem := ctx.baseModuleName()194	if String(compiler.Properties.Stem) != "" {195		stem = String(compiler.Properties.Stem)196	}197	return stem198}199func (compiler *baseCompiler) relativeInstallPath() string {200	return String(compiler.Properties.Relative_install_path)201}202func srcPathFromModuleSrcs(ctx ModuleContext, srcs []string) android.Path {203	srcPaths := android.PathsForModuleSrc(ctx, srcs)204	if len(srcPaths) != 1 {205		ctx.PropertyErrorf("srcs", "srcs can only contain one path for rust modules")206	}207	return srcPaths[0]208}...

debug.go

Source:debug.go

...6)7func DebugTrace(vm *VM) {8	var trace func(int, *VM)9	switch vm.previous() {10	case compiler.OpConstant, compiler.OpSetGlobal, compiler.OpGetGlobal, compiler.OpSetLocal, compiler.OpGetLocal,11		compiler.OpCloseUpvalues, compiler.OpGetUpvalue, compiler.OpSetUpvalue, compiler.OpReturn:12		trace = traceConstant13	case compiler.OpAdd, compiler.OpSubtract, compiler.OpNot, compiler.OpNegate, compiler.OpMult, compiler.OpDivide, compiler.OpNil,14		compiler.OpPop, compiler.OpAssert, compiler.OpLess, compiler.OpGreater, compiler.OpEquals, compiler.OpAnd, compiler.OpOr,15		compiler.OpCreateTable, compiler.OpSetTable, compiler.OpInsertTable, compiler.OpInitTable, compiler.OpGetTable, compiler.OpZero,16		compiler.OpClosure, compiler.OpAssignStart, compiler.OpAssignCleanup, compiler.OpLocalAllocate, compiler.OpLocalCleanup:17		trace = traceInstruction18	case compiler.OpCall:19		trace = traceCall20	case compiler.OpCreateUpvalue:21		trace = traceUpvalue22	case compiler.OpJumpIfFalse:23		trace = traceJump24	case compiler.OpLoop:25		trace = traceLoop26	default:27		panic(fmt.Sprint("Do not know how to trace: ", compiler.ByteName(vm.previous())))28	}29	trace(vm.frame.ip, vm)...

Get

Using AI Code Generation

1import (2func main() {3	out, err := exec.Command("go", "env", "GOOS").Output()4	if err != nil {5		fmt.Println(err)6	}7	fmt.Println("Compiler: " + string(out))8}9import (10func main() {11	out, err := exec.Command("go", "env", "GOARCH").Output()12	if err != nil {13		fmt.Println(err)14	}15	fmt.Println("Compiler: " + string(out))16}17import (18func main() {19	out, err := exec.Command("go", "env", "GOROOT").Output()20	if err != nil {21		fmt.Println(err)22	}23	fmt.Println("Compiler: " + string(out))24}25import (26func main() {27	out, err := exec.Command("go", "env", "GOPATH").Output()28	if err != nil {29		fmt.Println(err)30	}31	fmt.Println("Compiler: " + string(out))32}33import (34func main() {35	out, err := exec.Command("go", "env", "GOBIN").Output()36	if err != nil {37		fmt.Println(err)38	}39	fmt.Println("Compiler: " + string(out))40}41import (

Get

Using AI Code Generation

1import (2func main() {3	fmt.Println(runtime.Compiler)4}5import (6func main() {7	fmt.Println(runtime.GOARCH)8}9import (10func main() {11	fmt.Println(runtime.GOOS)12}13import (14func main() {15	fmt.Println(runtime.GOROOT())16}17import (18func main() {19	fmt.Println(runtime.GOMAXPROCS(0))20}21import (22func main() {23	fmt.Println(runtime.NumCPU())24}

Get

Using AI Code Generation

1import (2func main() {3	fmt.Println("Value of a is", a)4	fmt.Println("Value of b is", b)5	fmt.Println("Type of a is", reflect.TypeOf(a))6	fmt.Println("Type of b is", reflect.TypeOf(b))7}8import (9func main() {10	fmt.Println("Value of a is", a)11	fmt.Println("Value of b is", b)12	fmt.Println("Type of a is", reflect.TypeOf(a))13	fmt.Println("Type of b is", reflect.TypeOf(b))14}15import (16func main() {17	fmt.Println("Value of a is", a)18	fmt.Println("Value of b is", b)19	fmt.Println("Type of a is", reflect.TypeOf(a))20	fmt.Println("Type of b is", reflect.TypeOf(b))21}

Get

Using AI Code Generation

1import (2func main() {3   c := new(exec.Cmd)4   c.Path, _ = exec.LookPath("go")5   c.Args = []string{c.Path, "env", "GOARCH"}6   out, err := c.Output()7   if err != nil {8      fmt.Println(err)9      os.Exit(1)10   }11   fmt.Println(string(out))12}

Get

Using AI Code Generation

1import (2func main() {3	fmt.Println("Value of a:", a)4}5import (6func main() {7	fmt.Println("Value of a:", a)8}9import (10func main() {11	fmt.Println("Value of a:", a)12}13import (14func main() {15	fmt.Println("Value of a:", a)16}17import (18func main() {19	fmt.Println("Value of a:", a)20}21import (22func main() {23	fmt.Println("Value of a:", a)24}25import (26func main() {27	fmt.Println("Value of a:", a)28}29import (30func main() {31	fmt.Println("Value of a:", a)32}

Get

Using AI Code Generation

1import "fmt"2import "github.com/Compiler-Design-Lab-2020/01-compiler-class-AbhishekSinha1997/01-compiler-class-AbhishekSinha1997"3func main() {4    compiler := compilerclass.Compiler{}5    compiler.Get()6    fmt.Println(compiler)7}

Get

Using AI Code Generation

1import "fmt"2func main() {3    comp := new(Compiler)4    comp.Compile()5}6import "fmt"7type Compiler struct {8}9func (comp *Compiler) Compile() {10    fmt.Println("Compiling the code")11}12import "fmt"13type Compiler struct {14}15func (comp *Compiler) Get() *Compiler {16}17import "fmt"18type Compiler struct {19}20func (comp *Compiler) New() *Compiler {21}22import "fmt"23type Compiler struct {24}25func (comp *Compiler) NewCompiler() *Compiler {26}27import "fmt"28type Compiler struct {29}30func (comp *Compiler) NewCompiler() *Compiler {31}32import "fmt"33type Compiler struct {34}35func (comp *Compiler) NewCompiler() *Compiler {36}37import "fmt"38type Compiler struct {39}40func (comp *Compiler) NewCompiler() *Compiler {41}42import "fmt"43type Compiler struct {44}45func (comp *Compiler) NewCompiler() *Compiler {

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.