How to use instructionLen method of backend Package

Best Syzkaller code snippet using backend.instructionLen

pc.go

Source:pc.go

...8func RestorePC(pc, base uint32) uint64 {9	return uint64(base)<<32 + uint64(pc)10}11func PreviousInstructionPC(target *targets.Target, pc uint64) uint64 {12	offset := instructionLen(target.Arch)13	pc -= offset14	// THUMB instructions are 2 or 4 bytes with low bit set.15	// ARM instructions are always 4 bytes.16	if target.Arch == targets.ARM {17		return pc & ^uint64(1)18	}19	return pc20}21func NextInstructionPC(target *targets.Target, pc uint64) uint64 {22	offset := instructionLen(target.Arch)23	pc += offset24	// THUMB instructions are 2 or 4 bytes with low bit set.25	// ARM instructions are always 4 bytes.26	if target.Arch == targets.ARM {27		return pc & ^uint64(1)28	}29	return pc30}31func instructionLen(arch string) uint64 {32	switch arch {33	case targets.AMD64:34		return 535	case targets.I386:36		return 537	case targets.ARM64:38		return 439	case targets.ARM:40		return 341	case targets.PPC64LE:42		return 443	case targets.MIPS64LE:44		return 845	case targets.S390x:...

instructionLen

Using AI Code Generation

1import (2func main() {3    mod := ir.NewModule()4    foo := mod.NewFunc("foo", types.Void)5    entry := foo.NewBlock("entry")6    entry.NewRet(nil)7    bar := mod.NewFunc("bar", types.Void)8    entry = bar.NewBlock("entry")9    entry.NewRet(nil)10    main := mod.NewFunc("main", types.I32)11    entry = main.NewBlock("entry")12    v := entry.NewCall(foo, nil)13    entry.NewRet(v)14    then := main.NewBlock("then")15    v = then.NewCall(bar, nil)16    then.NewRet(v)17    otherwise := main.NewBlock("otherwise")18    otherwise.NewRet(constant.NewInt(types.I32, 1))19    entry.NewCondBr(v, then, otherwise)20    fmt.Println(mod)

instructionLen

Using AI Code Generation

1import (2func main() {3    m := ir.NewModule()4    fn := m.NewFunc("add", types.I32, ir.NewParam("x", types.I32), ir.NewParam("y", types.I32))5    entry := fn.NewBlock("entry")6    xpy := entry.NewAdd(fn.Param(0), fn.Param(1))7    entry.NewRet(xpy)8    fmt.Println(m)9    m = ir.NewModule()10    fn = m.NewFunc("add", types.I32, ir.NewParam("x", types.I32), ir.NewParam("y", types.I32))11    entry = fn.NewBlock("entry")12    xpy = entry.NewAdd(fn.Param(0), fn.Param(1))13    entry.NewRet(xpy)14    fmt.Println(m)

instructionLen

Using AI Code Generation

1import (2type backend struct {3}4func (b *backend) instructionLen() int {5}6func main() {7	b := new(backend)8	fmt.Println("Instruction length is", b.instructionLen())9}10import (11type backend struct {12}13func (b *backend) instructionLen() int {14}15func main() {16	b := new(backend)17	fmt.Println("Instruction length is", b.instructionLen())18}19import (20type backend struct {21}22func (b *backend) instructionLen() int {23}24func main() {25	b := new(backend)26	fmt.Println("Instruction length is", b.instructionLen())27}28import (29type backend struct {30}31func (b *backend) instructionLen() int {32}33func main() {34	b := new(backend)35	fmt.Println("Instruction length is", b.instructionLen())36}37import (38type backend struct {39}40func (b *backend) instructionLen() int {41}42func main() {43	b := new(backend)44	fmt.Println("Instruction length is", b.instructionLen())45}46import (47type backend struct {48}49func (b *backend) instructionLen() int {50}51func main() {52	b := new(backend)53	fmt.Println("Instruction length is", b.instructionLen())54}55import (56type backend struct {57}58func (b *backend) instructionLen() int {59}60func main() {61	b := new(backend)62	fmt.Println("Instruction length is", b.instructionLen())63}

instructionLen

Using AI Code Generation

1import (2type Backend struct {3}4type Backend1 struct {5}6type Backend2 struct {7}8type Backend3 struct {9}10func (b Backend) instructionLen() int {11	return int(unsafe.Sizeof(b))12}13func (b Backend1) instructionLen() int {14	return int(unsafe.Sizeof(b))15}16func (b Backend2) instructionLen() int {17	return int(unsafe.Sizeof(b))18}19func (b Backend3) instructionLen() int {20	return int(unsafe.Sizeof(b))21}22func main() {23	b1 := Backend1{}24	b2 := Backend2{}25	b3 := Backend3{}26	fmt.Println(b1.instructionLen())27	fmt.Println(b2.instructionLen())28	fmt.Println(b3.instructionLen())29}

instructionLen

Using AI Code Generation

1import (2func main() {3    instLen = backend.instructionLen()4    fmt.Println("Instruction Length is ", instLen)5}6import (7func main() {8    instLen = backend.instructionLen()9    fmt.Println("Instruction Length is ", instLen)10}11import (12func main() {13    instLen = backend.instructionLen()14    fmt.Println("Instruction Length is ", instLen)15}16import (17func main() {18    instLen = backend.instructionLen()19    fmt.Println("Instruction Length is ", instLen)20}21import (22func main() {23    instLen = backend.instructionLen()24    fmt.Println("Instruction Length is ", instLen)25}26import (27func main() {28    instLen = backend.instructionLen()29    fmt.Println("Instruction Length is ", instLen)30}31import (32func main() {33    instLen = backend.instructionLen()34    fmt.Println("Instruction Length is ", instLen)35}36import (37func main() {38    instLen = backend.instructionLen()39    fmt.Println("Instruction Length is ", instLen)40}41import (42func main() {

instructionLen

Using AI Code Generation

1func main() {2    b = backend{0}3    b.instructionLen(0)4}5func main() {6    b = backend{0}7    b.instructionLen(0)8}9func main() {10    b = backend{0}11    b.instructionLen(0)12}13func main() {14    b = backend{0}15    b.instructionLen(0)16}17func main() {18    b = backend{0}19    b.instructionLen(0)20}21func main() {22    b = backend{0}23    b.instructionLen(0)24}25func main() {26    b = backend{0}27    b.instructionLen(0)28}29func main() {30    b = backend{0}31    b.instructionLen(0)32}33func main() {34    b = backend{0}35    b.instructionLen(0)36}37func main() {38    b = backend{0}39    b.instructionLen(0)40}41func main() {42    b = backend{0}43    b.instructionLen(0)44}45func main() {46    b = backend{0}47    b.instructionLen(0)48}

instructionLen

Using AI Code Generation

1int totalLen = backend.instructionLen();2int len = backend.instructionLen();3int totalLen = backend.instructionLen();4int len = backend.instructionLen();5int totalLen = backend.instructionLen();6int len = backend.instructionLen();7int totalLen = backend.instructionLen();8int len = backend.instructionLen();9int totalLen = backend.instructionLen();10int len = backend.instructionLen();11int totalLen = backend.instructionLen();12int len = backend.instructionLen();13int totalLen = backend.instructionLen();14int len = backend.instructionLen();

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.