Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use Copy method of signal Package

Best Syzkaller code snippet using signal.Copy

session.go

Source:session.go

1// Copyright 2011 The Go Authors. All rights reserved.2// Use of this source code is governed by a BSD-style3// license that can be found in the LICENSE file.4package ssh5// Session implements an interactive session described in6// "RFC 4254, section 6".7import (8	"bytes"9	"encoding/binary"10	"errors"11	"fmt"12	"io"13	"io/ioutil"14	"sync"15)16type Signal string17// POSIX signals as listed in RFC 4254 Section 6.10.18const (19	SIGABRT Signal = "ABRT"20	SIGALRM Signal = "ALRM"21	SIGFPE  Signal = "FPE"22	SIGHUP  Signal = "HUP"23	SIGILL  Signal = "ILL"24	SIGINT  Signal = "INT"25	SIGKILL Signal = "KILL"26	SIGPIPE Signal = "PIPE"27	SIGQUIT Signal = "QUIT"28	SIGSEGV Signal = "SEGV"29	SIGTERM Signal = "TERM"30	SIGUSR1 Signal = "USR1"31	SIGUSR2 Signal = "USR2"32)33var signals = map[Signal]int{34	SIGABRT: 6,35	SIGALRM: 14,36	SIGFPE:  8,37	SIGHUP:  1,38	SIGILL:  4,39	SIGINT:  2,40	SIGKILL: 9,41	SIGPIPE: 13,42	SIGQUIT: 3,43	SIGSEGV: 11,44	SIGTERM: 15,45}46type TerminalModes map[uint8]uint3247// POSIX terminal mode flags as listed in RFC 4254 Section 8.48const (49	tty_OP_END    = 050	VINTR         = 151	VQUIT         = 252	VERASE        = 353	VKILL         = 454	VEOF          = 555	VEOL          = 656	VEOL2         = 757	VSTART        = 858	VSTOP         = 959	VSUSP         = 1060	VDSUSP        = 1161	VREPRINT      = 1262	VWERASE       = 1363	VLNEXT        = 1464	VFLUSH        = 1565	VSWTCH        = 1666	VSTATUS       = 1767	VDISCARD      = 1868	IGNPAR        = 3069	PARMRK        = 3170	INPCK         = 3271	ISTRIP        = 3372	INLCR         = 3473	IGNCR         = 3574	ICRNL         = 3675	IUCLC         = 3776	IXON          = 3877	IXANY         = 3978	IXOFF         = 4079	IMAXBEL       = 4180	ISIG          = 5081	ICANON        = 5182	XCASE         = 5283	ECHO          = 5384	ECHOE         = 5485	ECHOK         = 5586	ECHONL        = 5687	NOFLSH        = 5788	TOSTOP        = 5889	IEXTEN        = 5990	ECHOCTL       = 6091	ECHOKE        = 6192	PENDIN        = 6293	OPOST         = 7094	OLCUC         = 7195	ONLCR         = 7296	OCRNL         = 7397	ONOCR         = 7498	ONLRET        = 7599	CS7           = 90100	CS8           = 91101	PARENB        = 92102	PARODD        = 93103	TTY_OP_ISPEED = 128104	TTY_OP_OSPEED = 129105)106// A Session represents a connection to a remote command or shell.107type Session struct {108	// Stdin specifies the remote process's standard input.109	// If Stdin is nil, the remote process reads from an empty110	// bytes.Buffer.111	Stdin io.Reader112	// Stdout and Stderr specify the remote process's standard113	// output and error.114	//115	// If either is nil, Run connects the corresponding file116	// descriptor to an instance of ioutil.Discard. There is a117	// fixed amount of buffering that is shared for the two streams.118	// If either blocks it may eventually cause the remote119	// command to block.120	Stdout io.Writer121	Stderr io.Writer122	ch        Channel // the channel backing this session123	started   bool    // true once Start, Run or Shell is invoked.124	copyFuncs []func() error125	errors    chan error // one send per copyFunc126	// true if pipe method is active127	stdinpipe, stdoutpipe, stderrpipe bool128	// stdinPipeWriter is non-nil if StdinPipe has not been called129	// and Stdin was specified by the user; it is the write end of130	// a pipe connecting Session.Stdin to the stdin channel.131	stdinPipeWriter io.WriteCloser132	exitStatus chan error133}134// SendRequest sends an out-of-band channel request on the SSH channel135// underlying the session.136func (s *Session) SendRequest(name string, wantReply bool, payload []byte) (bool, error) {137	return s.ch.SendRequest(name, wantReply, payload)138}139func (s *Session) Close() error {140	return s.ch.Close()141}142// RFC 4254 Section 6.4.143type setenvRequest struct {144	Name  string145	Value string146}147// Setenv sets an environment variable that will be applied to any148// command executed by Shell or Run.149func (s *Session) Setenv(name, value string) error {150	msg := setenvRequest{151		Name:  name,152		Value: value,153	}154	ok, err := s.ch.SendRequest("env", true, Marshal(&msg))155	if err == nil && !ok {156		err = errors.New("ssh: setenv failed")157	}158	return err159}160// RFC 4254 Section 6.2.161type ptyRequestMsg struct {162	Term     string163	Columns  uint32164	Rows     uint32165	Width    uint32166	Height   uint32167	Modelist string168}169// RequestPty requests the association of a pty with the session on the remote host.170func (s *Session) RequestPty(term string, h, w int, termmodes TerminalModes) error {171	var tm []byte172	for k, v := range termmodes {173		kv := struct {174			Key byte175			Val uint32176		}{k, v}177		tm = append(tm, Marshal(&kv)...)178	}179	tm = append(tm, tty_OP_END)180	req := ptyRequestMsg{181		Term:     term,182		Columns:  uint32(w),183		Rows:     uint32(h),184		Width:    uint32(w * 8),185		Height:   uint32(h * 8),186		Modelist: string(tm),187	}188	ok, err := s.ch.SendRequest("pty-req", true, Marshal(&req))189	if err == nil && !ok {190		err = errors.New("ssh: pty-req failed")191	}192	return err193}194// RFC 4254 Section 6.5.195type subsystemRequestMsg struct {196	Subsystem string197}198// RequestSubsystem requests the association of a subsystem with the session on the remote host.199// A subsystem is a predefined command that runs in the background when the ssh session is initiated200func (s *Session) RequestSubsystem(subsystem string) error {201	msg := subsystemRequestMsg{202		Subsystem: subsystem,203	}204	ok, err := s.ch.SendRequest("subsystem", true, Marshal(&msg))205	if err == nil && !ok {206		err = errors.New("ssh: subsystem request failed")207	}208	return err209}210// RFC 4254 Section 6.7.211type ptyWindowChangeMsg struct {212	Columns uint32213	Rows    uint32214	Width   uint32215	Height  uint32216}217// WindowChange informs the remote host about a terminal window dimension change to h rows and w columns.218func (s *Session) WindowChange(h, w int) error {219	req := ptyWindowChangeMsg{220		Columns: uint32(w),221		Rows:    uint32(h),222		Width:   uint32(w * 8),223		Height:  uint32(h * 8),224	}225	_, err := s.ch.SendRequest("window-change", false, Marshal(&req))226	return err227}228// RFC 4254 Section 6.9.229type signalMsg struct {230	Signal string231}232// Signal sends the given signal to the remote process.233// sig is one of the SIG* constants.234func (s *Session) Signal(sig Signal) error {235	msg := signalMsg{236		Signal: string(sig),237	}238	_, err := s.ch.SendRequest("signal", false, Marshal(&msg))239	return err240}241// RFC 4254 Section 6.5.242type execMsg struct {243	Command string244}245// Start runs cmd on the remote host. Typically, the remote246// server passes cmd to the shell for interpretation.247// A Session only accepts one call to Run, Start or Shell.248func (s *Session) Start(cmd string) error {249	if s.started {250		return errors.New("ssh: session already started")251	}252	req := execMsg{253		Command: cmd,254	}255	ok, err := s.ch.SendRequest("exec", true, Marshal(&req))256	if err == nil && !ok {257		err = fmt.Errorf("ssh: command %v failed", cmd)258	}259	if err != nil {260		return err261	}262	return s.start()263}264// Run runs cmd on the remote host. Typically, the remote265// server passes cmd to the shell for interpretation.266// A Session only accepts one call to Run, Start, Shell, Output,267// or CombinedOutput.268//269// The returned error is nil if the command runs, has no problems270// copying stdin, stdout, and stderr, and exits with a zero exit271// status.272//273// If the remote server does not send an exit status, an error of type274// *ExitMissingError is returned. If the command completes275// unsuccessfully or is interrupted by a signal, the error is of type276// *ExitError. Other error types may be returned for I/O problems.277func (s *Session) Run(cmd string) error {278	err := s.Start(cmd)279	if err != nil {280		return err281	}282	return s.Wait()283}284// Output runs cmd on the remote host and returns its standard output.285func (s *Session) Output(cmd string) ([]byte, error) {286	if s.Stdout != nil {287		return nil, errors.New("ssh: Stdout already set")288	}289	var b bytes.Buffer290	s.Stdout = &b291	err := s.Run(cmd)292	return b.Bytes(), err293}294type singleWriter struct {295	b  bytes.Buffer296	mu sync.Mutex297}298func (w *singleWriter) Write(p []byte) (int, error) {299	w.mu.Lock()300	defer w.mu.Unlock()301	return w.b.Write(p)302}303// CombinedOutput runs cmd on the remote host and returns its combined304// standard output and standard error.305func (s *Session) CombinedOutput(cmd string) ([]byte, error) {306	if s.Stdout != nil {307		return nil, errors.New("ssh: Stdout already set")308	}309	if s.Stderr != nil {310		return nil, errors.New("ssh: Stderr already set")311	}312	var b singleWriter313	s.Stdout = &b314	s.Stderr = &b315	err := s.Run(cmd)316	return b.b.Bytes(), err317}318// Shell starts a login shell on the remote host. A Session only319// accepts one call to Run, Start, Shell, Output, or CombinedOutput.320func (s *Session) Shell() error {321	if s.started {322		return errors.New("ssh: session already started")323	}324	ok, err := s.ch.SendRequest("shell", true, nil)325	if err == nil && !ok {326		return errors.New("ssh: could not start shell")327	}328	if err != nil {329		return err330	}331	return s.start()332}333func (s *Session) start() error {334	s.started = true335	type F func(*Session)336	for _, setupFd := range []F{(*Session).stdin, (*Session).stdout, (*Session).stderr} {337		setupFd(s)338	}339	s.errors = make(chan error, len(s.copyFuncs))340	for _, fn := range s.copyFuncs {341		go func(fn func() error) {342			s.errors <- fn()343		}(fn)344	}345	return nil346}347// Wait waits for the remote command to exit.348//349// The returned error is nil if the command runs, has no problems350// copying stdin, stdout, and stderr, and exits with a zero exit351// status.352//353// If the remote server does not send an exit status, an error of type354// *ExitMissingError is returned. If the command completes355// unsuccessfully or is interrupted by a signal, the error is of type356// *ExitError. Other error types may be returned for I/O problems.357func (s *Session) Wait() error {358	if !s.started {359		return errors.New("ssh: session not started")360	}361	waitErr := <-s.exitStatus362	if s.stdinPipeWriter != nil {363		s.stdinPipeWriter.Close()364	}365	var copyError error366	for range s.copyFuncs {367		if err := <-s.errors; err != nil && copyError == nil {368			copyError = err369		}370	}371	if waitErr != nil {372		return waitErr373	}374	return copyError375}376func (s *Session) wait(reqs <-chan *Request) error {377	wm := Waitmsg{status: -1}378	// Wait for msg channel to be closed before returning.379	for msg := range reqs {380		switch msg.Type {381		case "exit-status":382			wm.status = int(binary.BigEndian.Uint32(msg.Payload))383		case "exit-signal":384			var sigval struct {385				Signal     string386				CoreDumped bool387				Error      string388				Lang       string389			}390			if err := Unmarshal(msg.Payload, &sigval); err != nil {391				return err392			}393			// Must sanitize strings?394			wm.signal = sigval.Signal395			wm.msg = sigval.Error396			wm.lang = sigval.Lang397		default:398			// This handles keepalives and matches399			// OpenSSH's behaviour.400			if msg.WantReply {401				msg.Reply(false, nil)402			}403		}404	}405	if wm.status == 0 {406		return nil407	}408	if wm.status == -1 {409		// exit-status was never sent from server410		if wm.signal == "" {411			// signal was not sent either.  RFC 4254412			// section 6.10 recommends against this413			// behavior, but it is allowed, so we let414			// clients handle it.415			return &ExitMissingError{}416		}417		wm.status = 128418		if _, ok := signals[Signal(wm.signal)]; ok {419			wm.status += signals[Signal(wm.signal)]420		}421	}422	return &ExitError{wm}423}424// ExitMissingError is returned if a session is torn down cleanly, but425// the server sends no confirmation of the exit status.426type ExitMissingError struct{}427func (e *ExitMissingError) Error() string {428	return "wait: remote command exited without exit status or exit signal"429}430func (s *Session) stdin() {431	if s.stdinpipe {432		return433	}434	var stdin io.Reader435	if s.Stdin == nil {436		stdin = new(bytes.Buffer)437	} else {438		r, w := io.Pipe()439		go func() {440			_, err := io.Copy(w, s.Stdin)441			w.CloseWithError(err)442		}()443		stdin, s.stdinPipeWriter = r, w444	}445	s.copyFuncs = append(s.copyFuncs, func() error {446		_, err := io.Copy(s.ch, stdin)447		if err1 := s.ch.CloseWrite(); err == nil && err1 != io.EOF {448			err = err1449		}450		return err451	})452}453func (s *Session) stdout() {454	if s.stdoutpipe {455		return456	}457	if s.Stdout == nil {458		s.Stdout = ioutil.Discard459	}460	s.copyFuncs = append(s.copyFuncs, func() error {461		_, err := io.Copy(s.Stdout, s.ch)462		return err463	})464}465func (s *Session) stderr() {466	if s.stderrpipe {467		return468	}469	if s.Stderr == nil {470		s.Stderr = ioutil.Discard471	}472	s.copyFuncs = append(s.copyFuncs, func() error {473		_, err := io.Copy(s.Stderr, s.ch.Stderr())474		return err475	})476}477// sessionStdin reroutes Close to CloseWrite.478type sessionStdin struct {479	io.Writer480	ch Channel481}482func (s *sessionStdin) Close() error {483	return s.ch.CloseWrite()484}485// StdinPipe returns a pipe that will be connected to the486// remote command's standard input when the command starts.487func (s *Session) StdinPipe() (io.WriteCloser, error) {...

Copy

Using AI Code Generation

1import (2func main() {3	c := make(chan os.Signal, 1)4	signal.Notify(c, os.Interrupt, syscall.SIGTERM)5	fmt.Println("awaiting signal")6	fmt.Println("Got signal:", s)7}8import (9func main() {10	c := make(chan os.Signal, 1)11	signal.Notify(c, os.Interrupt, syscall.SIGTERM)12	go func() {13		fmt.Println("Got signal")14	}()15	select {}16}

Copy

Using AI Code Generation

1import (2func main() {3    c := make(chan os.Signal)4    signal.Notify(c, os.Interrupt)5    fmt.Println("Got signal:", s)6}7import (8func main() {9    c := make(chan os.Signal)10    signal.Ignore(os.Interrupt)11    signal.Notify(c, os.Interrupt)12    fmt.Println("Got signal:", s)13}14import (15func main() {16    c := make(chan os.Signal)17    signal.Notify(c, os.Interrupt)18    fmt.Println("Got signal:", s)19    signal.Reset(os.Interrupt)20    fmt.Println("Got signal:", s)21}22import (23func main() {24    c := make(chan os.Signal)25    signal.Notify(c, os.Interrupt)26    fmt.Println("Got signal:", s)27    signal.Stop(c)28    fmt.Println("Got signal:", s)29}30import (31func main() {32    c := make(chan os.Signal)33    signal.Notify(c, os.Interrupt)34    fmt.Println("Got signal:", s)35    fmt.Println("String:", s.String())36}37import (38func main() {39    c := make(chan os.Signal)40    signal.Notify(c, os.Interrupt)41    fmt.Println("Got signal:", s)42    fmt.Println("String:", s.String())

Copy

Using AI Code Generation

1import (2func main() {3	c := make(chan int)4	go func() {5	}()6	fmt.Println(<-c)7}8import (9func main() {10	c := make(chan int)11	go func() {12	}()13	fmt.Println(<-c)14}15import (16func main() {17	c := make(chan int)18	go func() {19	}()20	fmt.Println(<-c)21}22import (23func main() {24	c := make(chan int)25	go func() {26	}()27	fmt.Println(<-c)28}29import (30func main() {31	c := make(chan int)32	go func() {33	}()34	fmt.Println(<-c)35}36import (37func main() {38	c := make(chan int)39	go func() {40	}()41	fmt.Println(<-c)42}43import (44func main() {45	c := make(chan int)46	go func() {47	}()48	fmt.Println(<-c)49}50import (51func main() {52	c := make(chan int)53	go func() {54	}()55	fmt.Println(<-c)56}57import (58func main() {59	c := make(chan int)60	go func() {61	}()62	fmt.Println(<-c)63}

Copy

Using AI Code Generation

1func main() {2    c := make(chan os.Signal, 1)3    signal.Notify(c, os.Interrupt)4    go func() {5        for sig := range c {6            fmt.Println(sig)7        }8    }()9    time.Sleep(1000000)10    fmt.Println("done")11}12func main() {13    sigs := make(chan os.Signal, 1)14    done := make(chan bool, 1)15    signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM)16    go func() {17        fmt.Println()18        fmt.Println(sig)19    }()20    fmt.Println("awaiting signal")21    fmt.Println("exiting")22}23func main() {24    sigs := make(chan os.Signal, 1)25    done := make(chan bool, 1)26    signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM)27    go func() {28        fmt.Println()29        fmt.Println(sig)30    }()31    fmt.Println("awaiting signal")32    fmt.Println("exiting")33}34func main() {35    c := make(chan os.Signal, 1)36    signal.Notify(c, os.Interrupt)37    go func() {38        for sig := range c {39            fmt.Println(sig)40        }41    }()42    time.Sleep(1000000)43    fmt.Println("done")44}45func main() {46    sigs := make(chan os.Signal, 1)47    done := make(chan bool, 1)48    signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM)49    go func() {50        fmt.Println()51        fmt.Println(sig)52    }()53    fmt.Println("awaiting signal")54    fmt.Println("exiting")55}56func main() {57    c := make(chan os.Signal

Copy

Using AI Code Generation

1import (2func main() {3	canvas := svg.New(os.Stdout)4	canvas.Start(width, height)5	canvas.Rect(0, 0, width, height, "fill:white")6	canvas.Circle(250, 250, 50, "fill:red")7	canvas.Gstyle("fill:blue")8	canvas.Path("M 250 200 L 300 250 L 250 300 L 200 250 Z")9	canvas.Gend()10	canvas.End()11}12import (13func main() {14	canvas := svg.New(os.Stdout)15	canvas.Start(width, height)16	canvas.Rect(0, 0, width, height, "fill:white")17	canvas.Circle(250, 250, 50, "fill:red")18	canvas.Gstyle("fill:blue")19	canvas.Path("M 250 200 L 300 250 L 250 300 L 200 250 Z")20	canvas.Gend()21	canvas.End()22}

Copy

Using AI Code Generation

1import (2func main() {3	err := sdl.Init(sdl.INIT_EVERYTHING)4	if err != nil {5		fmt.Println(err)6	}7	defer sdl.Quit()8	window, err := sdl.CreateWindow("Testing SDL2", sdl.WINDOWPOS_UNDEFINED, sdl.WINDOWPOS_UNDEFINED,9		int32(winWidth), int32(winHeight), sdl.WINDOW_SHOWN)10	if err != nil {11		fmt.Println(err)12	}13	defer window.Destroy()14	renderer, err := sdl.CreateRenderer(window, -1, sdl.RENDERER_ACCELERATED)15	if err != nil {16		fmt.Println(err)17	}18	defer renderer.Destroy()19	texture, err := renderer.CreateTextureFromSurface(sdl.LoadBMP("image.bmp"))20	if err != nil {21		fmt.Println(err)22	}23	defer texture.Destroy()24	rect := sdl.Rect{X: 0, Y: 0, W: 100, H: 100}25	for {26		for event := sdl.PollEvent(); event != nil; event = sdl.PollEvent() {27			switch t := event.(type) {28				if t.Button == sdl.BUTTON_LEFT {29				}30			}31		}32		renderer.SetDrawColor(255, 255, 255, 255)33		renderer.Clear()34		renderer.Copy(texture, nil, &rect)35		renderer.Present()36	}37}38import (39func main() {40	err := sdl.Init(sdl.INIT_EVERY

Copy

Using AI Code Generation

1import (2func main() {3	c := make(chan os.Signal, 2)4	signal.Notify(c, os.Interrupt, syscall.SIGINT)5	signal.Notify(c, os.Interrupt, syscall.SIGTERM)6	fmt.Println("Got signal:", s)7}8import (9func main() {10	c := make(chan os.Signal, 2)11	signal.Notify(c, os.Interrupt, syscall.SIGINT)12	signal.Notify(c, os.Interrupt, syscall.SIGTERM)13	signal.Notify(c, os.Interrupt, syscall.SIGKILL)14	fmt.Println("Got signal:", s)15}16import (17func main() {18	c := make(chan os.Signal, 2)19	signal.Notify(c, os.Interrupt, syscall.SIGINT)20	signal.Notify(c, os.Interrupt, syscall.SIGTERM)21	signal.Notify(c, os.Interrupt, syscall.SIGKILL)22	signal.Notify(c, os.Interrupt, syscall.SIGQUIT)23	fmt.Println("Got signal:", s)24}25import (

Copy

Using AI Code Generation

1import (2func main() {3	gtk.Init(nil)4	window := gtk.NewWindow(gtk.WINDOW_TOPLEVEL)5	window.SetTitle("Copy Signal")6	window.Connect("destroy", func() {7		gtk.MainQuit()8	})9	window.SetDefaultSize(400, 400)10	button1 := gtk.NewButtonWithLabel("Button 1")11	button2 := gtk.NewButtonWithLabel("Button 2")12	button3 := gtk.NewButtonWithLabel("Button 3")13	button4 := gtk.NewButtonWithLabel("Button 4")14	button5 := gtk.NewButtonWithLabel("Button 5")15	button6 := gtk.NewButtonWithLabel("Button 6")16	button7 := gtk.NewButtonWithLabel("Button 7")17	button8 := gtk.NewButtonWithLabel("Button 8")18	button9 := gtk.NewButtonWithLabel("Button 9")19	button10 := gtk.NewButtonWithLabel("Button 10")20	button11 := gtk.NewButtonWithLabel("Button 11")21	button12 := gtk.NewButtonWithLabel("Button 12")22	button13 := gtk.NewButtonWithLabel("Button 13")23	button14 := gtk.NewButtonWithLabel("Button 14")

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.