How to use Reverse method of internal Package

Best Ginkgo code snippet using internal.Reverse

block_filterer.go

Source:block_filterer.go

...27// and branch (Internal or External).28type BlockFilterer struct {29	// Params specifies the chain params of the current network.30	Params *chaincfg.Params31	// ExReverseFilter holds a reverse index mapping an external address to32	// the scoped index from which it was derived.33	ExReverseFilter map[string]waddrmgr.ScopedIndex34	// InReverseFilter holds a reverse index mapping an internal address to35	// the scoped index from which it was derived.36	InReverseFilter map[string]waddrmgr.ScopedIndex37	// WathcedOutPoints is a global set of outpoints being tracked by the38	// wallet. This allows the block filterer to check for spends from an39	// outpoint we own.40	WatchedOutPoints map[wire.OutPoint]btcutil.Address41	// FoundExternal is a two-layer map recording the scope and index of42	// external addresses found in a single block.43	FoundExternal map[waddrmgr.KeyScope]map[uint32]struct{}44	// FoundInternal is a two-layer map recording the scope and index of45	// internal addresses found in a single block.46	FoundInternal map[waddrmgr.KeyScope]map[uint32]struct{}47	// FoundOutPoints is a set of outpoints found in a single block whose48	// address belongs to the wallet.49	FoundOutPoints map[wire.OutPoint]btcutil.Address50	// RelevantTxns records the transactions found in a particular block51	// that contained matches from an address in either ExReverseFilter or52	// InReverseFilter.53	RelevantTxns []*wire.MsgTx54}55// NewBlockFilterer constructs the reverse indexes for the current set of56// external and internal addresses that we are searching for, and is used to57// scan successive blocks for addresses of interest. A particular block filter58// can be reused until the first call from `FitlerBlock` returns true.59func NewBlockFilterer(params *chaincfg.Params,60	req *FilterBlocksRequest) *BlockFilterer {61	// Construct a reverse index by address string for the requested62	// external addresses.63	nExAddrs := len(req.ExternalAddrs)64	exReverseFilter := make(map[string]waddrmgr.ScopedIndex, nExAddrs)65	for scopedIndex, addr := range req.ExternalAddrs {66		exReverseFilter[addr.EncodeAddress()] = scopedIndex67	}68	// Construct a reverse index by address string for the requested69	// internal addresses.70	nInAddrs := len(req.InternalAddrs)71	inReverseFilter := make(map[string]waddrmgr.ScopedIndex, nInAddrs)72	for scopedIndex, addr := range req.InternalAddrs {73		inReverseFilter[addr.EncodeAddress()] = scopedIndex74	}75	foundExternal := make(map[waddrmgr.KeyScope]map[uint32]struct{})76	foundInternal := make(map[waddrmgr.KeyScope]map[uint32]struct{})77	foundOutPoints := make(map[wire.OutPoint]btcutil.Address)78	return &BlockFilterer{79		Params:           params,80		ExReverseFilter:  exReverseFilter,81		InReverseFilter:  inReverseFilter,82		WatchedOutPoints: req.WatchedOutPoints,83		FoundExternal:    foundExternal,84		FoundInternal:    foundInternal,85		FoundOutPoints:   foundOutPoints,86	}87}88// FilterBlock parses all txns in the provided block, searching for any that89// contain addresses of interest in either the external or internal reverse90// filters. This method return true iff the block contains a non-zero number of91// addresses of interest, or a transaction in the block spends from outpoints92// controlled by the wallet.93func (bf *BlockFilterer) FilterBlock(block *wire.MsgBlock) bool {94	var hasRelevantTxns bool95	for _, tx := range block.Transactions {96		if bf.FilterTx(tx) {97			bf.RelevantTxns = append(bf.RelevantTxns, tx)98			hasRelevantTxns = true99		}100	}101	return hasRelevantTxns102}103// FilterTx scans all txouts in the provided txn, testing to see if any found104// addresses match those contained within the external or internal reverse105// indexes. This method returns true iff the txn contains a non-zero number of106// addresses of interest, or the transaction spends from an outpoint that107// belongs to the wallet.108func (bf *BlockFilterer) FilterTx(tx *wire.MsgTx) bool {109	var isRelevant bool110	// First, check the inputs to this transaction to see if they spend any111	// inputs belonging to the wallet. In addition to checking112	// WatchedOutPoints, we also check FoundOutPoints, in case a txn spends113	// from an outpoint created in the same block.114	for _, in := range tx.TxIn {115		if _, ok := bf.WatchedOutPoints[in.PreviousOutPoint]; ok {116			isRelevant = true117		}118		if _, ok := bf.FoundOutPoints[in.PreviousOutPoint]; ok {119			isRelevant = true120		}121	}122	// Now, parse all of the outputs created by this transactions, and see123	// if they contain any addresses known the wallet using our reverse124	// indexes for both external and internal addresses. If a new output is125	// found, we will add the outpoint to our set of FoundOutPoints.126	for i, out := range tx.TxOut {127		_, addrs, _, err := txscript.ExtractPkScriptAddrs(128			out.PkScript, bf.Params,129		)130		if err != nil {131			log.Warnf("Could not parse output script in %s:%d: %v",132				tx.TxHash(), i, err)133			continue134		}135		if !bf.FilterOutputAddrs(addrs) {136			continue137		}138		// If we've reached this point, then the output contains an139		// address of interest.140		isRelevant = true141		// Record the outpoint that containing the address in our set of142		// found outpoints, so that the caller can update its global143		// set of watched outpoints.144		outPoint := wire.OutPoint{145			Hash:  *btcutil.NewTx(tx).Hash(),146			Index: uint32(i),147		}148		bf.FoundOutPoints[outPoint] = addrs[0]149	}150	return isRelevant151}152// FilterOutputAddrs tests the set of addresses against the block filterer's153// external and internal reverse address indexes. If any are found, they are154// added to set of external and internal found addresses, respectively. This155// method returns true iff a non-zero number of the provided addresses are of156// interest.157func (bf *BlockFilterer) FilterOutputAddrs(addrs []btcutil.Address) bool {158	var isRelevant bool159	for _, addr := range addrs {160		addrStr := addr.EncodeAddress()161		if scopedIndex, ok := bf.ExReverseFilter[addrStr]; ok {162			bf.foundExternal(scopedIndex)163			isRelevant = true164		}165		if scopedIndex, ok := bf.InReverseFilter[addrStr]; ok {166			bf.foundInternal(scopedIndex)167			isRelevant = true168		}169	}170	return isRelevant171}172// foundExternal marks the scoped index as found within the block filterer's173// FoundExternal map. If this the first index found for a particular scope, the174// scope's second layer map will be initialized before marking the index.175func (bf *BlockFilterer) foundExternal(scopedIndex waddrmgr.ScopedIndex) {176	if _, ok := bf.FoundExternal[scopedIndex.Scope]; !ok {177		bf.FoundExternal[scopedIndex.Scope] = make(map[uint32]struct{})178	}179	bf.FoundExternal[scopedIndex.Scope][scopedIndex.Index] = struct{}{}...

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("hello, world"))4}5import (6func main() {7	fmt.Println(internal.Reverse("hello, world"))8}9import (10func main() {11	fmt.Println(internal.Reverse("hello, world"))12}13import (14func main() {15	fmt.Println(internal.Reverse("hello, world"))16}17import (18func main() {19	fmt.Println(internal.Reverse("hello, world"))20}21import (22func main() {23	fmt.Println(internal.Reverse("hello, world"))24}25import (26func main() {27	fmt.Println(internal.Reverse("hello, world"))28}29import (30func main() {31	fmt.Println(internal.Reverse("hello, world"))32}33import (34func main() {35	fmt.Println(internal.Reverse("hello, world"))36}37import (38func main() {39	fmt.Println(internal.Reverse("hello, world"))40}41import (42func main() {43	fmt.Println(internal.Reverse("hello, world"))44}45import (

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("Hello, world."))4}5func Reverse(s string) string {6	r := []rune(s)7	for i, j := 0, len(r)-1; i < len(r)/2; i, j = i+1, j-1 {8	}9	return string(r)10}11	/usr/lib/go-1.10/src/internal (from $GOROOT)12	/home/user1/go/src/internal (from $GOPATH)

Reverse

Using AI Code Generation

1import (2func main() {3    fmt.Println(internal.Reverse("Hello, World!"))4}5For example, if you have a package named mypackage in the directory $GOPATH/src/mypackage, you can import it in your code using the following statement:6import "mypackage"7For example, if you have a package named mypackage in the directory $GOPATH/src/mypackage/mysubpackage, you can import it in your code using the following statement:8import "mypackage/mysubpackage"9For example, if you have a package named mypackage in the directory $GOPATH/src/mypackage/mysubpackage, you can import it in your code using the following statement:10import "mypackage/mysubpackage"11For example, if you have a package named mypackage in the directory $GOPATH/src/mypackage/mysubpackage, you can import it in your code using

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("Hello, world."))4}5import (6func main() {7	fmt.Println(internal.Reverse("Hello, world."))8}9import (10func main() {11	fmt.Println(internal.Reverse("Hello, world."))12}13import (14func main() {15	fmt.Println(internal.Reverse("Hello, world."))16}17import (18func main() {19	fmt.Println(internal.Reverse("Hello, world."))20}21import (22func main() {23	fmt.Println(internal.Reverse("Hello, world."))24}25import (26func main() {27	fmt.Println(internal.Reverse("Hello, world."))28}29import (30func main() {31	fmt.Println(internal.Reverse("Hello, world."))32}33import (34func main() {35	fmt.Println(internal.Reverse("Hello, world."))36}

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("Hello, world."))4}5import (6func main() {7	fmt.Println(internal.Reverse("Hello, world."))8}9import (10func main() {11	fmt.Println(internal.Reverse("Hello, world."))12}13import (14func main() {15	fmt.Println(internal.Reverse("Hello, world."))16}

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("Hello, world"))4}5func Reverse(s string) string {6	r := []rune(s)7	for i, j := 0, len(r)-1; i < len(r)/2; i, j = i+1, j-1 {8	}9	return string(r)10}11I want to import internal/1.go in 1.go12import "internal/1.go"13	/usr/local/go/src/internal/1.go (from $GOROOT)14	/home/username/go/src/internal/1.go (from $GOPATH)15How can I import internal/1.go in 1.go?16I want to import internal/1.go in 1.go17import "internal/1.go"18    /usr/local/go/src/internal/1.go (from $GOROOT)19    /home/username/go/src/internal/1.go (from $GOPATH)20How can I import internal/1.go in 1.go?21I want to import internal/1.go in 1.go22import "internal/1.go"23    /usr/local/go/src/internal/1.go (from $GOROOT)24    /home/username/go/src/internal/1.go (from $GOPATH)25How can I import internal/1.go in 1.go?

Reverse

Using AI Code Generation

1import (2func main() {3    fmt.Println("Enter a string to be reversed:")4    fmt.Scanln(&input)5    fmt.Println("Reversed string is:")6    fmt.Println(reverse.Reverse(input))7}

Reverse

Using AI Code Generation

1import (2func main() {3	fmt.Println(internal.Reverse("Hello, world."))4}5import (6func main() {7	fmt.Println(internal.Reverse("Hello, world."))8}9import (10func main() {11	fmt.Println(internal.Reverse("Hello, world."))12}13import (14func main() {15	fmt.Println(internal.Reverse("Hello, world."))16}17import (18func main() {19	fmt.Println(internal.Reverse("Hello, world."))20}

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.