Unlock 30% off on Manual Testing Annual Plans this Holiday Season.

Copied to Clipboard!

How to use Stop method of influxdb Package

Best K6 code snippet using influxdb.Stop

e2e_large_test.go

Source:e2e_large_test.go

...47	gnatsd := spouttest.RunGnatsd(natsPort)48	defer gnatsd.Shutdown()49	// Start influxd & set up test database.50	influxd := spouttest.RunFakeInfluxd(influxdPort)51	defer influxd.Stop()52	// Use a fake filesystem (for config files).53	config.Fs = afero.NewMemMapFs()54	// Start spout components.55	listener := startListener(t)56	defer listener.Stop()57	httpListener := startHTTPListener(t)58	defer httpListener.Stop()59	filter := startFilter(t)60	defer filter.Stop()61	downsampler := startDownsampler(t)62	defer downsampler.Stop()63	writer := startWriter(t)64	defer writer.Stop()65	archiveWriter := startArchiveWriter(t)66	defer archiveWriter.Stop()67	monitor := startMonitor(t)68	defer monitor.Stop()69	// Connect to the listener.70	addr := net.JoinHostPort("localhost", strconv.Itoa(listenerPort))71	conn, err := net.Dial("udp", addr)72	require.NoError(t, err)73	defer conn.Close()74	// Do 5 UDP metric sends each containing 2 lines.75	for i := 0; i < sendCount/2; i++ {76		_, err := conn.Write(makeTestLines().Bytes())77		require.NoError(t, err)78		// Generous sleep between sends to avoid UDP drops.79		time.Sleep(100 * time.Millisecond)80	}81	// Do 5 HTTP metric sends, the same as the UDP sends above.82	url := fmt.Sprintf("http://localhost:%d/write", httpListenerPort)83	for i := 0; i < sendCount/2; i++ {84		_, err := http.Post(url, "text/plain", makeTestLines())85		require.NoError(t, err)86	}87	// Check "databases".88	checkDatabase(t, influxd, dbName, sendCount, isCPULine)89	checkDatabase(t, influxd, archiveDBName, 1, isLikeCPULine)90	assert.Equal(t, 2, influxd.DatabaseCount()) // primary + archive91	// Check metrics published by monitor component.92	expectedMetrics := regexp.MustCompile(`93failed_nats_publish{component="downsampler",host="h",name="downsampler"} 094failed_nats_publish{component="filter",host="h",name="filter"} 095failed_nats_publish{component="listener",host="h",name="listener"} 096failed_writes{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test",influxdb_port="44601",name="writer"} 097failed_writes{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test-archive",influxdb_port="44601",name="archive-writer"} 098invalid_lines{component="downsampler",host="h",name="downsampler"} 099invalid_timestamps{component="downsampler",host="h",name="downsampler"} 0100invalid_time{component="filter",host="h",name="filter"} 0101nats_dropped{component="downsampler",host="h",name="downsampler",subject="system"} 0102nats_dropped{component="filter",host="h",name="filter"} 0103nats_dropped{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test",influxdb_port="44601",name="writer",subject="system"} 0104nats_dropped{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test-archive",influxdb_port="44601",name="archive-writer",subject="system-archive"} 0105passed{component="filter",host="h",name="filter"} 10106processed{component="filter",host="h",name="filter"} 20107read_errors{component="listener",host="h",name="listener"} 0108received{component="downsampler",host="h",name="downsampler"} 2109received{component="listener",host="h",name="listener"} 5110received{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test",influxdb_port="44601",name="writer"} 2111received{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test-archive",influxdb_port="44601",name="archive-writer"} 1112rejected{component="filter",host="h",name="filter"} 10113sent{component="downsampler",host="h",name="downsampler"} 1114sent{component="listener",host="h",name="listener"} 1115triggered{component="filter",host="h",name="filter",rule="system"} 10116write_requests{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test",influxdb_port="44601",name="writer"} 2117write_requests{component="writer",host="h",influxdb_address="localhost",influxdb_dbname="test-archive",influxdb_port="44601",name="archive-writer"} 1118$`[1:])119	var lines string120	for try := 0; try < 20; try++ {121		resp, err := http.Get(fmt.Sprintf("http://localhost:%d/metrics", monitorPort))122		require.NoError(t, err)123		raw, err := ioutil.ReadAll(resp.Body)124		require.NoError(t, err)125		lines = spouttest.StripTimestamps(t, string(raw))126		if expectedMetrics.MatchString(lines) {127			return128		}129		time.Sleep(500 * time.Millisecond)130	}131	t.Fatalf("Failed to see expected metrics. Last saw:\n%s", lines)132}133const cpuLineHeader = "cpu,cls=server,env=prod "134const cpuLine = cpuLineHeader + "user=13.33,usage_system=0.16,usage_idle=86.53"135func makeTestLines() *bytes.Buffer {136	now := time.Now().UnixNano()137	out := new(bytes.Buffer)138	// Only the 2nd line should make it through the filter.139	fmt.Fprintf(out, `140foo,env=dev bar=99 %d141%s %d142`[1:], now, cpuLine, now)143	return out144}145func startListener(t *testing.T) stoppable {146	return startComponent(t, "listener", fmt.Sprintf(`147mode = "listener"148port = %d149nats_address = "nats://localhost:%d"150batch_max_count = 5151debug = true152nats_subject_monitor = "monitor"153`, listenerPort, natsPort))154}155func startHTTPListener(t *testing.T) stoppable {156	return startComponent(t, "listener", fmt.Sprintf(`157mode = "listener_http"158port = %d159nats_address = "nats://localhost:%d"160batch_max_count = 5161debug = true162nats_subject_monitor = "monitor"163`, httpListenerPort, natsPort))164}165func startFilter(t *testing.T) stoppable {166	return startComponent(t, "filter", fmt.Sprintf(`167mode = "filter"168nats_address = "nats://localhost:%d"169debug = true170nats_subject_monitor = "monitor"171[[rule]]172type = "basic"173match = "cpu"174subject = "system"175`, natsPort))176}177func startDownsampler(t *testing.T) stoppable {178	return startComponent(t, "downsampler", fmt.Sprintf(`179mode = "downsampler"180nats_address = "nats://localhost:%d"181debug = true182nats_subject_monitor = "monitor"183nats_subject = ["system"]184downsample_period = "3s"185`, natsPort))186}187func startWriter(t *testing.T) stoppable {188	return baseStartWriter(t, "writer", "system", dbName)189}190func startArchiveWriter(t *testing.T) stoppable {191	return baseStartWriter(t, "archive-writer", "system-archive", archiveDBName)192}193func baseStartWriter(t *testing.T, name, subject, dbName string) stoppable {194	return startComponent(t, name, fmt.Sprintf(`195mode = "writer"196name = "%s"197nats_address = "nats://localhost:%d"198nats_subject = ["%s"]199influxdb_port = %d200influxdb_dbname = "%s"201batch_max_count = 1202workers = 4203debug = true204nats_subject_monitor = "monitor"205`, name, natsPort, subject, influxdPort, dbName))206}207func startMonitor(t *testing.T) stoppable {208	return startComponent(t, "monitor", fmt.Sprintf(`209mode = "monitor"210nats_address = "nats://localhost:%d"211nats_subject_monitor = "monitor"212port = %d213`, natsPort, monitorPort))214}215func startComponent(t *testing.T, name, configText string) stoppable {216	probePort := getProbePort()217	configText = fmt.Sprintf("probe_port = %d\n%s", probePort, configText)218	configFilename := name + ".toml"219	err := afero.WriteFile(config.Fs, configFilename, []byte(configText), 0600)220	require.NoError(t, err)221	s, err := runComponent(configFilename)222	require.NoError(t, err)223	if !spouttest.CheckReadyProbe(probePort) {224		s.Stop()225		t.Fatalf("startup probe for %s failed", name)226	}227	return s228}229func checkDatabase(t *testing.T, db *spouttest.FakeInfluxDB, dbName string, expectedCount int, checkLine func(string) bool) {230	maxWaitTime := time.Now().Add(spouttest.LongWait)231	for {232		lines := db.Lines(dbName)233		recvCount := len(lines)234		if recvCount == expectedCount {235			// Expected number of lines received. Now check they are correct.236			for _, line := range lines {237				if !checkLine(line) {238					t.Fatalf("unexpected line received: %s", line)...

influxdb.go

Source:influxdb.go

...13	}14	switch event.Event.GetEventType() {15	default:16		return nil, ErrEventDiscarded17	case events.Envelope_HttpStartStop:18		return convertHttpStartStop(event.Event.GetHttpStartStop(), event.Meta)19	case events.Envelope_LogMessage:20		return convertLogMessage(event.Event.GetLogMessage(), event.Meta)21	case events.Envelope_ContainerMetric:22		return convertContainerMetric(event.Event.GetContainerMetric(), event.Event.GetTimestamp(), event.Meta)23	}24}25func convertHttpStartStop(e *events.HttpStartStop, meta enricher.AppMetadata) (*influxdb.Point, error) {26	start := time.Unix(0, e.GetStartTimestamp())27	stop := time.Unix(0, e.GetStopTimestamp())28	return influxdb.NewPoint(29		"http_request", // metric name30		map[string]string{ // tags31			"app":         meta.App,32			"app_guid":    meta.AppGUID,33			"space":       meta.Space,34			"space_guid":  meta.SpaceGUID,35			"org":         meta.Org,36			"org_guid":    meta.OrgGUID,37			"instance":    fmt.Sprint(e.GetInstanceIndex()),38			"method":      e.GetMethod().String(),39			"status_code": fmt.Sprint(e.GetStatusCode()),40			// "instance_guid": e.GetInstanceId(),41		},...

timeseries.go

Source:timeseries.go

...15	DbName       string16}17type TimeSeries interface {18	Points() chan<- *influxdb.Point19	Stop() chan struct{}20}21type timeseries struct {22	config    *Configuration23	db        *influxdb.Client24	pointsBuf []influxdb.Point25	// channels26	pointsChan chan *influxdb.Point27	stop       chan struct{}28}29func NewTimeSeries(config *Configuration) (TimeSeries, error) {30	// validate InfluxDB url31	u, err := url.Parse("http://" + config.AddrInfluxDb)32	if err != nil {33		return nil, err34	}35	// connect to InfluxDB36	cconfig := influxdb.Config{37		URL:      *u,38		Username: config.DbUser,39		Password: config.DbPwd,40	}41	client, err := influxdb.NewClient(cconfig)42	if err != nil {43		return nil, err44	}45	// we may have connected, but let's ping46	_, _, err = client.Ping()47	if err != nil {48		return nil, err49	}50	// we're good to go51	ts := &timeseries{52		config:     config,53		db:         client,54		pointsBuf:  make([]influxdb.Point, 0, FLUSH_MAX_POINTS),55		pointsChan: make(chan *influxdb.Point),56		stop:       make(chan struct{}),57	}58	// handle incoming metrics59	go ts.run(FLUSH_INTERVAL_MS, FLUSH_MAX_POINTS)60	return ts, nil61}62func (ts *timeseries) Points() chan<- *influxdb.Point {63	return ts.pointsChan64}65func (ts *timeseries) Stop() chan struct{} {66	return ts.stop67}68// Handles incoming metrics in batches69// TODO handle write errors70// TODO implement pool of flushers71func (ts *timeseries) run(flushInterval int, flushMaxPoints int) {72	flushTimeout := time.NewTicker(time.Duration(flushInterval) * time.Millisecond)73	for {74		select {75		case <-ts.stop:76			ts.flush()77			flushTimeout.Stop()78			return79		case point := <-ts.pointsChan:80			ts.pointsBuf = append(ts.pointsBuf, *point)81			if len(ts.pointsBuf) == flushMaxPoints {82				ts.flush()83			}84		case <-flushTimeout.C:85			// is there anything to flush?86			if len(ts.pointsBuf) > 0 {87				ts.flush()88			}89		}90	}91}...

Stop

Using AI Code Generation

1import (2func main() {3	c, err := client.NewHTTPClient(client.HTTPConfig{4	})5	if err != nil {6		fmt.Println("Error: ", err.Error())7	}8	defer c.Close()9	bp, err := client.NewBatchPoints(client.BatchPointsConfig{10	})11	if err != nil {12		fmt.Println("Error: ", err.Error())13	}14	tags := map[string]string{"cpu": "cpu-total"}15	fields := map[string]interface{}{16	}17	pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())18	if err != nil {19		fmt.Println("Error: ", err.Error())20	}21	bp.AddPoint(pt)22	c.Write(bp)23	c.Stop()24}25import (26func main() {27	c, err := client.NewHTTPClient(client.HTTPConfig{28	})29	if err != nil {30		fmt.Println("Error: ", err.Error())31	}32	defer c.Close()33	bp, err := client.NewBatchPoints(client.BatchPointsConfig{34	})35	if err != nil {36		fmt.Println("Error: ", err.Error())37	}38	tags := map[string]string{"cpu": "cpu-total"}39	fields := map[string]interface{}{

Stop

Using AI Code Generation

1import (2func main() {3	c, err := client.NewHTTPClient(client.HTTPConfig{4	})5	if err != nil {6		fmt.Println("Error creating InfluxDB Client: ", err.Error())7	}8	defer c.Close()9	bp, err := client.NewBatchPoints(client.BatchPointsConfig{10	})11	if err != nil {12		fmt.Println("Error: ", err.Error())13	}14	tags := map[string]string{"cpu": "cpu-total"}15	fields := map[string]interface{}{16	}17	pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())18	if err != nil {19		fmt.Println("Error: ", err.Error())20	}21	bp.AddPoint(pt)22	c.Write(bp)23	c.Stop()24}25import (26func main() {27	c, err := client.NewHTTPClient(client.HTTPConfig{28	})29	if err != nil {30		fmt.Println("Error creating InfluxDB Client: ", err.Error())31	}32	defer c.Close()33	bp, err := client.NewBatchPoints(client.BatchPointsConfig{34	})35	if err != nil {36		fmt.Println("Error: ", err.Error())37	}38	tags := map[string]string{"cpu": "cpu-total"}39	fields := map[string]interface{}{40	}

Stop

Using AI Code Generation

1import (2func main() {3    c, err := client.NewHTTPClient(client.HTTPConfig{4    })5    if err != nil {6        fmt.Println("Error: ", err.Error())7    }8    defer c.Close()9    bp, _ := client.NewBatchPoints(client.BatchPointsConfig{10    })11    tags := map[string]string{"host": "server01", "region": "us-west"}12    fields := map[string]interface{}{13    }14    pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())15    if err != nil {16        fmt.Println("Error: ", err.Error())17    }18    bp.AddPoint(pt)19    c.Write(bp)20    c.Stop()21}22import (23func main() {24    c, err := client.NewHTTPClient(client.HTTPConfig{25    })26    if err != nil {27        fmt.Println("Error: ", err.Error())28    }29    defer c.Close()30    bp, _ := client.NewBatchPoints(client.BatchPointsConfig{31    })32    tags := map[string]string{"host": "server01", "region": "us-west"}33    fields := map[string]interface{}{34    }35    pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())36    if err != nil {37        fmt.Println("Error: ", err.Error())38    }39    bp.AddPoint(pt)40    c.Write(bp)41    c.Close()42}

Stop

Using AI Code Generation

1import (2func main() {3	c, err := client.NewHTTPClient(client.HTTPConfig{4	})5	if err != nil {6		fmt.Println("Error creating InfluxDB Client: ", err.Error())7	}8	fmt.Println("Created client")9	bp, err := client.NewBatchPoints(client.BatchPointsConfig{10	})11	if err != nil {12		fmt.Println("Error creating batch points: ", err.Error())13	}14	fmt.Println("Created batch points")15	tags := map[string]string{"cpu": "cpu-total"}16	fields := map[string]interface{}{17	}18	pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())19	if err != nil {20		fmt.Println("Error: ", err.Error())21	}22	bp.AddPoint(pt)23	c.Write(bp)24	c.Stop()25}26import (27func main() {28	c, err := client.NewHTTPClient(client.HTTPConfig{29	})30	if err != nil {31		fmt.Println("Error creating InfluxDB Client: ", err.Error())32	}33	fmt.Println("Created client")34	bp, err := client.NewBatchPoints(client.BatchPointsConfig{35	})36	if err != nil {37		fmt.Println("Error creating batch points: ", err.Error())38	}39	fmt.Println("Created batch points")40	tags := map[string]string{"cpu": "cpu-total"}41	fields := map[string]interface{}{

Stop

Using AI Code Generation

1import (2func main() {3	c, err := client.NewHTTPClient(client.HTTPConfig{4	})5	if err != nil {6		log.Fatal(err)7	}8	defer c.Close()9	bp, err := client.NewBatchPoints(client.BatchPointsConfig{10	})11	if err != nil {12		log.Fatal(err)13	}14	tags := map[string]string{"cpu": "cpu-total"}15	fields := map[string]interface{}{16	}17	pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())18	if err != nil {19		log.Fatal(err)20	}21	bp.AddPoint(pt)22	c.Write(bp)23	c.Stop()24	fmt.Println("Client stopped")25}26Recommended Posts: InfluxDB | client.NewHTTPClient()27InfluxDB | client.NewBatchPoints()28InfluxDB | client.NewPoint()29InfluxDB | client.Query()30InfluxDB | client.QueryAsChunk()31InfluxDB | client.QueryAsStruct()32InfluxDB | client.QueryAsStructChunk()33InfluxDB | client.SetHTTPClient()34InfluxDB | client.SetTimeout()35InfluxDB | client.SetAuth()36InfluxDB | client.SetUDPBufferSize()

Stop

Using AI Code Generation

1func main() {2    c, err := client.NewHTTPClient(client.HTTPConfig{3    })4    if err != nil {5        log.Fatal(err)6    }7    defer c.Close()8    bp, err := client.NewBatchPoints(client.BatchPointsConfig{9    })10    if err != nil {11        log.Fatal(err)12    }13    tags := map[string]string{"cpu": "cpu-total"}14    fields := map[string]interface{}{15    }16    pt, err := client.NewPoint("cpu_usage", tags, fields, time.Now())17    if err != nil {18        log.Fatal(err)19    }20    bp.AddPoint(pt)21    c.Write(bp)22    c.Stop()23}

Stop

Using AI Code Generation

1import (2func main() {3	c, err := client.NewHTTPClient(client.HTTPConfig{4	})5	if err != nil {6		log.Fatal(err)7	}8	if err := c.Stop(); err != nil {9		fmt.Fprintln(os.Stderr, err)10		os.Exit(1)11	}12}13import (14func main() {15	c, err := client.NewHTTPClient(client.HTTPConfig{16	})17	if err != nil {18		log.Fatal(err)19	}20	if err := c.Kill(); err != nil {21		fmt.Fprintln(os.Stderr, err)22		os.Exit(1)23	}24}25import (26func main() {27	c, err := client.NewHTTPClient(client.HTTPConfig{28	})29	if err != nil {30		log.Fatal(err)31	}32	q := client.Query{33	}34	if response, err := c.Query(q); err == nil && response.Error() == nil {35		fmt.Println(response.Results)36	}37}38import (39func main() {

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.