How to use Connect method of main Package

Best Syzkaller code snippet using main.Connect

hide.me.go

Source:hide.me.go

...110	if err = client.GetAccessToken(); err != nil { fmt.Println( "Main: [ERR] Access-Token request failed,", err ); return }					// Request an Access-Token111	fmt.Println( "Main: Access-Token stored in", conf.Client.AccessTokenFile )112	return113}114// Connect115func connect( conf *configuration.Configuration ) {116	client, err := rest.NewClient( &conf.Client )																							// Create the REST client117	if err != nil { fmt.Println( "Main: [ERR] REST Client setup failed,", err ); return }118	if ! client.HaveAccessToken() { fmt.Println( "Main: [ERR] No Access-Token available" ); return }										// Access-Token is required for the Connect/Disconnect methods119	120	link := wireguard.NewLink( conf.Link )121	if err = link.Open(); err != nil { fmt.Println( "Main: [ERR] Wireguard open failed,", err ); return }									// Open or create a wireguard interface, auto-generate a private key when no private key has been configured122	defer link.Close()123	124	dhcpDestination := &net.IPNet{IP: []byte{ 255, 255, 255, 255 }, Mask: []byte{ 255, 255, 255, 255 } }									// IPv4 DHCP VPN bypass "throw" route125	if err = link.ThrowRouteAdd( "DHCP bypass", dhcpDestination ); err != nil { fmt.Println( "Main: [ERR] DHCP bypass route failed,", err ); return }126	defer link.ThrowRouteDel( "DHCP bypass", dhcpDestination )127	128	if len( conf.Client.DnsServers ) > 0 {129		for _, dnsServer := range strings.Split( conf.Client.DnsServers, "," ) {															// throw routes for configured DNS servers130			udpAddr, err := net.ResolveUDPAddr( "udp", dnsServer )131			if err != nil { fmt.Println( "Main: [ERR] DNS server address resolve failed,", err ); return }132			if err = link.ThrowRouteAdd( "DNS server", wireguard.Ip2Net( udpAddr.IP ) ); err != nil { fmt.Println( "Main: [ERR] Route DNS server failed,", err ); return }133			defer link.ThrowRouteDel( "DNS server", wireguard.Ip2Net( udpAddr.IP ) )134		}135	}136	137	if len( conf.Link.SplitTunnel ) > 0 {138		for _, network := range strings.Split( conf.Link.SplitTunnel, "," ) {																// throw routes for split-tunnel destinations139			_, ipNet, err := net.ParseCIDR( network )140			if err != nil { fmt.Println( "Main: [ERR] Parse split-tunnel route from", network, "failed,", err ); return }141			if err = link.ThrowRouteAdd( "Split-Tunnel", ipNet ); err != nil { fmt.Println( "Main: [ERR] Split-tunnel route to ", network, "failed,", err ); return }142			defer link.ThrowRouteDel( "Split-Tunnel", ipNet )143		}144	}145	146	if conf.Link.LeakProtection {																											// Add the "loopback" default routes to the configured routing tables ( IP leak protection )147		if err = link.LoopbackRoutesAdd(); err != nil { fmt.Println( "Main: [ERR] Addition of loopback routes failed,", err ); return }148		defer link.LoopbackRoutesDel()149	}150	151	err = link.RulesAdd(); defer link.RulesDel()																							// Add the RPDB rules which direct traffic to configured routing tables152	if err != nil { fmt.Println( "Main: [ERR] RPDB rules failed,", err ); return }153	154	dpdContext, dpdCancel := context.Context(nil), context.CancelFunc(nil)155	go func() {																																// Wait for signals156		signalChannel := make ( chan os.Signal )157		signal.Notify( signalChannel, syscall.SIGINT, syscall.SIGTERM, syscall.SIGKILL )158		for { receivedSignal := <- signalChannel; fmt.Println( "Main: Terminating on", receivedSignal.String() ); dpdCancel() }				// Cancelling the DPD context results in the client's termination159	}()160	161	up := func() error {162		dpdContext, dpdCancel = context.WithTimeout( context.Background(), time.Second * 86380 )											// Hide.me sessions last up to 86400 seconds ( 20 seconds of slack should be enough for DNS and connection establishment )163		if resolveErr := client.Resolve(); resolveErr != nil { fmt.Println( "Main: [ERR] DNS failed,", resolveErr ); return resolveErr }	// Resolve the remote address164		serverIpNet := wireguard.Ip2Net( client.Remote().IP )165		166		fmt.Println( "Main: Connecting to", serverIpNet.IP )																				// Add the throw route in order to reach Hide.me167		if throwRouteAddErr := link.ThrowRouteAdd( "VPN server", serverIpNet ); throwRouteAddErr != nil { return throwRouteAddErr }168		defer link.ThrowRouteDel( "VPN server", serverIpNet )169	170		connectResponse, connectErr := client.Connect( link.PublicKey() )																	// Issue a REST Connect request171		if connectErr != nil { if urlError, ok := connectErr.( *url.Error ); ok { return urlError.Unwrap() }; return connectErr }172		fmt.Println( "Main: Connected to", client.Remote() )173		connectResponse.Print()																												// Print the response attributes ( connection properties )174		175		if upErr := link.Up( connectResponse ); upErr != nil { fmt.Println( "Main: [ERR] Link up failed,", upErr ); return upErr }			// Configure the wireguard interface, must succeed176		177		if connectResponse.StaleAccessToken && len( conf.Client.AccessTokenFile ) > 0 {														// When the Access-Token is stale and when it is kept saved refresh it178			go func() {179				if conf.Client.AccessTokenUpdateDelay > 0 {180					fmt.Println( "Main: Updating the Access-Token in", conf.Client.AccessTokenUpdateDelay )181					time.Sleep( conf.Client.AccessTokenUpdateDelay )182				}183				if tokenErr := client.GetAccessToken(); tokenErr != nil { fmt.Println( "Main: [ERR] Access-Token update failed,", tokenErr ); return }184				fmt.Println( "Main: Access-Token updated" )185			} ()186		}187		188		if supported, notificationErr := daemon.SdNotify( false, daemon.SdNotifyReady ); supported && err != nil {							// Send SystemD ready notification189			fmt.Println( "Main: [ERR] SystemD notification failed,", notificationErr )190		}191		192		dpdErr := link.DPD( dpdContext )																									// Start the dead peer detection loop193		if err = client.Disconnect( connectResponse.SessionToken ); err != nil { fmt.Println( "Main: [ERR] Disconnect POST failed,", err ) }// POST the "Disconnect" request194		fmt.Println( "Main: Disconnected" )195		link.Down()																															// Remove the DNS, rules, routes, addresses and the peer, must succeed196		197		return dpdErr198	}199	200	connectLoop:201	for {202		err = up()																															// Establish the connection203		if err == wireguard.ErrDpdTimeout {																									// Reconnect when there's a DPD timeout204			select {205				case <- dpdContext.Done(): err = context.Canceled; break connectLoop206				case <- time.After( conf.Client.ConnectTimeout ): continue connectLoop207			}208		}209		if err == context.DeadlineExceeded {																								// Reconnect when this session times out210			select {211				case <- time.After( conf.Client.ConnectTimeout ): continue connectLoop212			}213		}214		break215	}216	if err != context.Canceled {																											// For loop exit happened because of an error217		if conf.Link.LeakProtection {218			fmt.Println( "Main: [ERR] Connection setup/teardown failed, traffic blocked, waiting for a termination signal" )				// The client won't exit yet because the traffic should be blocked until an operator intervenes219			dpdContext, dpdCancel = context.WithCancel( context.Background() )220			<- dpdContext.Done()221		} else {222			fmt.Println( "Main: No leak protection active, exiting immediately")223		}224		225	}226	daemon.SdNotify( false, daemon.SdNotifyStopping )																						// Send SystemD notification227}228func main() {229	conf, command := configure()																											// Parse the command line flags and optionally read the configuration file230	if conf == nil { return }																												// Exit on configuration error231	232	switch command {233		case "conf": conf.Print()																											// Configuration dump234		case "token": accessToken( conf )																									// Access-Token235		case "connect": connect( conf )																										// Connect to the server236	}237}...

gohSignals.go

Source:gohSignals.go

...12/* Signals and Properties  */13/*    Implementations      */14/***************************/15func signalsPropHandler() {16	mainObjects.MoveApplyButton.Connect("clicked", MoveApplyButtonClicked)17	mainObjects.MoveCumulativeDndChk.Connect("clicked", CumulativeDndChkClicked)18	mainObjects.MoveEntryExtMask.Connect("activate", MoveEntryExtMaskEnterKeyPressed)19	mainObjects.MoveEntryExtMask.Connect("focus-out-event", MoveEntryExtMaskEnterKeyPressed)20	mainObjects.MoveFilechooserButton.Connect("selection-changed", MoveFilechooserButtonClicked)21	mainObjects.Notebook.Connect("switch-page", NotebookPageChanged)22	mainObjects.OverCaseSensChk.Connect("clicked", OverCaseSensChkChanged)23	mainObjects.OverCharClassChk.Connect("clicked", OverCharClassChkChanged)24	mainObjects.OverCharClassStrictModeChk.Connect("clicked", OverCharClassStrictModeChkChanged)25	mainObjects.RenApplyButton.Connect("clicked", RenApplyButtonClicked)26	mainObjects.RenCaseSensChk.Connect("clicked", RenCaseSensChkChanged)27	mainObjects.RenCumulativeDndChk.Connect("clicked", CumulativeDndChkClicked)28	mainObjects.RenEntryExtMask.Connect("activate", RenEntryExtMaskEnterKeyPressed)29	mainObjects.RenEntryExtMask.Connect("focus-out-event", RenEntryExtMaskEnterKeyPressed)30	mainObjects.RenIncrementChk.Connect("clicked", RenIncrementChkClicked)31	mainObjects.RenIncrementRightChk.Connect("clicked", RenIncrementRightChkClicked)32	mainObjects.RenIncSepEntry.Connect("changed", RenRemEntryFocusOut)33	mainObjects.RenIncSpinbutton.Connect("value-changed", RenRemEntryFocusOut)34	mainObjects.RenKeepBtwButton.Connect("clicked", RenKeepBtwButtonClicked)35	mainObjects.RenPresExtChk.Connect("clicked", RenPresExtChkChanged)36	mainObjects.RenRegexButton.Connect("clicked", RenRegexButtonClicked)37	mainObjects.RenRemEntry.Connect("changed", RenRemEntryFocusOut)38	mainObjects.RenRemEntry1.Connect("changed", RenRemEntryFocusOut)39	mainObjects.RenRemEntry2.Connect("changed", RenRemEntryFocusOut)40	mainObjects.RenReplEntry.Connect("changed", RenRemEntryFocusOut)41	mainObjects.RenReplEntry1.Connect("changed", RenRemEntryFocusOut)42	mainObjects.RenReplEntry2.Connect("changed", RenRemEntryFocusOut)43	mainObjects.RenScanSubDirChk.Connect("clicked", ScanSubDirChkChanged)44	mainObjects.RenShowDirChk.Connect("clicked", RenShowDirChkChanged)45	mainObjects.RenSubButton.Connect("clicked", RenSubButtonClicked)46	mainObjects.RenWthEntry.Connect("changed", RenRemEntryFocusOut)47	mainObjects.RenWthEntry1.Connect("changed", RenRemEntryFocusOut)48	mainObjects.RenWthEntry2.Connect("changed", RenRemEntryFocusOut)49	mainObjects.SingleCancelButton.Connect("clicked", windowDestroy)50	mainObjects.SingleEntry.Connect("changed", SingleEntryChanged)51	mainObjects.SingleEntry.Connect("activate", SingleEntryEnterKeyPressed)52	mainObjects.SingleOkButton.Connect("clicked", SingleOkButtonClicked)53	mainObjects.SinglePresExtChk.Connect("clicked", SinglePresExtChkClicked)54	mainObjects.SingleResetButton.Connect("clicked", SingleResetButtonClicked)55	mainObjects.SingleSwMultiButton.Connect("clicked", SingleSwMultiButtonClicked)56	mainObjects.TitleAddAEntry.Connect("changed", TitleEntryFocusOut)57	mainObjects.TitleAddBEntry.Connect("changed", TitleEntryFocusOut)58	mainObjects.TitleAddBFileEntry.Connect("changed", TitleAddToFileEntryEvent)59	mainObjects.TitleApplyButton.Connect("clicked", TitleApplyButtonClicked)60	mainObjects.TitleCumulativeDndChk.Connect("clicked", CumulativeDndChkClicked)61	mainObjects.TitleScanSubDirChk.Connect("clicked", ScanSubDirChkChanged)62	mainObjects.TitleSepEntry.Connect("changed", TitleEntryFocusOut)63	mainObjects.TitleSpinbutton.Connect("value-changed", TitleEntryFocusOut)64	mainObjects.TitleTextview.Connect("event", TitleEntryFocusOut)65	mainObjects.TopImageEventbox.Connect("button-release-event", imgTopReleaseEvent)66}...

Connect

Using AI Code Generation

1import (2func main() {3    if len(os.Args) != 2 {4        fmt.Fprintf(os.Stderr, "Usage: %s host:port ", os.Args[0])5        os.Exit(1)6    }7    tcpAddr, err := net.ResolveTCPAddr("tcp4", service)8    checkError(err)9    conn, err := net.DialTCP("tcp", nil, tcpAddr)10    checkError(err)11    _, err = conn.Write([]byte("HEAD / HTTP/1.0\r12    checkError(err)13    result, err := readFully(conn)14    checkError(err)15    fmt.Println(string(result))16    os.Exit(0)17}18func readFully(conn net.Conn) ([]byte, error) {19    defer conn.Close()20    result := bytes.NewBuffer(nil)21    for {22        n, err := conn.Read(buf[0:])23        result.Write(buf[0:n])24        if err != nil {25            if err == io.EOF {26            }27        }28    }29    return result.Bytes(), nil30}31func checkError(err error) {32    if err != nil {33        fmt.Fprintf(os.Stderr, "Fatal error: %s", err.Error())34        os.Exit(1)35    }36}

Connect

Using AI Code Generation

1import "fmt"2func main() {3    fmt.Println("Hello, 2")4    c := new(Connection)5    c.Connect()6}7import "fmt"8func main() {9    fmt.Println("Hello, 3")10    c := new(Connection)11    c.Connect()12}13import "fmt"14func main() {15    fmt.Println("Hello, 4")16    c := new(Connection)17    c.Connect()18}19import "fmt"20func main() {21    fmt.Println("Hello, 5")22    c := new(Connection)23    c.Connect()24}25import "fmt"26func main() {27    fmt.Println("Hello, 6")28    c := new(Connection)29    c.Connect()30}31import "fmt"32func main() {33    fmt.Println("Hello, 7")34    c := new(Connection)35    c.Connect()36}37import "fmt"38func main() {39    fmt.Println("Hello, 8")40    c := new(Connection)41    c.Connect()42}43import "fmt"44func main() {45    fmt.Println("Hello, 9")46    c := new(Connection)47    c.Connect()48}49import "fmt"50func main() {51    fmt.Println("Hello, 10")52    c := new(Connection)53    c.Connect()54}55import "fmt"56func main() {57    fmt.Println("Hello, 11")58    c := new(Connection)59    c.Connect()60}61import "fmt"62func main() {63    fmt.Println("Hello,

Connect

Using AI Code Generation

1import "fmt"2func main() {3    c1.Connect()4}5import "fmt"6func main() {7    c1.Connect()8}9import "fmt"10type class1 struct {11}12func (c1 *class1) Connect() {13    fmt.Println("Connection")14}15import "fmt"16type class1 struct {17}18func (c1 *class1) Connect() {19    fmt.Println("Connection")20}

Connect

Using AI Code Generation

1import (2func main() {3    fmt.Println("Hello, World!")4    var obj = new(main)5    obj.Connect()6}7import (8func main() {9    fmt.Println("Hello, World!")10    var obj = new(main)11    obj.Connect()12}13import (14func main() {15    fmt.Println("Hello, World!")16    var obj = new(main)17    obj.Connect()18}19import (20func main() {21    fmt.Println("Hello, World!")22    var obj = new(main)23    obj.Connect()24}25import (26func main() {27    fmt.Println("Hello, World!")28    var obj = new(main)29    obj.Connect()30}31import (32func main() {33    fmt.Println("Hello, World!")34    var obj = new(main)35    obj.Connect()36}37import (38func main() {39    fmt.Println("Hello, World!")40    var obj = new(main)41    obj.Connect()42}43import (44func main() {45    fmt.Println("Hello, World!")46    var obj = new(main)47    obj.Connect()48}49import (50func main() {51    fmt.Println("Hello, World!")52    var obj = new(main)53    obj.Connect()54}55import (56func main() {57    fmt.Println("Hello, World!")58    var obj = new(main)59    obj.Connect()60}

Connect

Using AI Code Generation

1import "fmt"2func main() {3    fmt.Println("Hello, World!")4    myVar := main{}5    myVar.Connect("hello")6}7import "fmt"8func (m main) Connect(s string) {9    fmt.Println("Hello, World!")10    fmt.Println(s)11}12import (13func main() {14    http.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {15        fmt.Fprintln(w, "Hello, World!")16    })17    http.ListenAndServe(":8080", nil)18}19import (20func main() {21    http.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {22        fmt.Fprintln(w, "Hello, World

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.